Chapter 6 Command Definitions
6.12.3SGDPE – Signaling Gateway Destination Point End
Synopsis
This command ends a Signaling Gateway destination point.
Syntax
SGDPE:DEST=;
Prerequisites
•The destination ID has already been initiated.
•The destination ID is not used elsewhere in the system.
Attributes
CONFIG
Examples
SGDPE:DEST=1;
6.12.4SGDPP – Signaling Gateway Destination Point Print
Synopsis
This command prints the configuration of routing parameters on a SS7 Signaling Gateway.
Syntax
SGDPP:[DEST=];
Prerequisites
•The destination ID has already been initiated.
Attributes
None
Examples
SGDPP;
Output Format
SS7 Routing Key Configuration
DEST | RTPRI | AS | LABEL |
1 | NONE | 1 | AS1 |
2 | IP |
| SGW2 |
3 | MTP |
| DEST3 |
EXECUTED
108
