Oregon Scientific BAR988HG Set Pre-Alarm, Activate Alarm, Snooze, View Barometer Area

EN
	SET PRE-ALARM
	The Pre-Alarm can be set to sound 15, 30, 45, or
	60 minutes before the Daily Alarm. It will sound whenever
	the recorded temperature from Channel 1 Sensor falls
	to 2°C (35.6°F) or below.
	For example, if you set the alarm to 7:00 AM, and the
	Pre-Alarm to 45 minutes, the Pre-Alarm will sound at
	6:15 AM provided the outdoor temperature at Channel
	1 Sensor is 2°C or below.

1.Set up and activate the Daily Alarm.

2.Press ALARM / to switch to Pre-Alarm view. (PRE-ALwill show at the top.)

3. Press and hold ALARM / for 2 seconds.

4.Press UP or DOWN to select 15, 30, 45 or 60 minutes. This is the amount of time the Pre-Alarm will sound BEFORE the Daily Alarm. The Pre-Alarm is automatically activated when you select a time.

5. Press ALARM / to confirm.

shows when the Pre-Alarm is set.

NOTE The Daily Alarm will NOT function until the next day if the Pre-Alarm has been triggered. Also, if you deactivate the Daily Alarm, the Pre-Alarm is automatically deactivated.

16

BAR988HG English R5 OP 16

Black

ACTIVATE ALARM

Navigate to the Clock Area, then press ALARM / to switch to Daily Alarm or Pre-Alarm view. To activate or deactivate the alarm, press UP or DOWN.

When the alarm time is reached, the backlight will be on for 8 seconds and crescendo alarm will sound for 2 minutes. Press any key (except snooze) to silence the alarm. It will sound at the same time the next day.

SNOOZE

Press SNOOZE / LIGHT to temporarily disable the alarm for 8 minutes. or will blink while snooze is on.

BAROMETER

This product tracks fluctuations in barometric pressure to provide the weather forecast, and the current and past 24 hours barometric pressure history measurements are recorded by the main (indoor) unit.

VIEW BAROMETER AREA

Press SELECT to navigate to the Barometer Area.

If is NOT shown, press MODE.

8/20/04, 11:25 AM