![](/images/new-backgrounds/1326470/326470187x1.webp)
Headset Compatibility
grammable Feature. The key lights while the extension is in the Headset mode, and is off while the Headset mode is disabled. If an extension user is on a call, pressing the Headset key automatically switches the active call to the headset. Pressing the Headset key again switches the call back to Handsfree.
Off-Hook Signaling and Headsets
Outside Calls (transfers and DILs)
If the extension is set up to receive
An extension in the headset mode will not hear
Intercom Calls
If the extension is set up to receive
Operation
|
|
|
|
|
| Using the Headset | In these instructions: |
|
| [Super Display Soft Key] | |
|
|
| [Keyset Soft Key] |
|
| ||
To connect the headset: |
| ||
|
|
|
|
1. | Plug a compatible headset into the telephone headset jack. |
| |
|
|
|
|
|
| ||
To turn the headset mode on and off: |
| ||
|
|
|
|
1. | Do one of the following. |
| |
|
|
|
|
| a. | Press the headset Feature Key on your telephone or DSS Console. |
|
|
|
|
|
| b. | Use the User Programmable Features (see below). |
|
|
|
|
|
|
| ||
While in the headset mode: |
| ||
|
|
|
|
1. | You can do the following. |
| |
|
|
|
|
| a. | Press a line key to place or answer an outside call. |
|
|
|
|
|
| b. | Press INTERCOM to get Intercom dial tone. |
|
|
|
|
|
| c. | If on a call, press SPEAKER to hang up. |
|
|
|
|
|
|
|
|
|
User Programmable Feature
Turning the Headset Mode On and Off
Feature | Mnemonic | Operation | Access Level |
|
|
|
|
|
|
|
|
Headset Compatibility | #HS (#47) | #HS + Y to enable or N to disable + SPEAKER to exit. | |
|
|
|
|
86 ◆ Features | DSX Feature Handbook |