NEC P/N 1093099 Placing Outside Calls Using Line Keys, To place an outside call over a Line Group

Central Office Calls, Placing

Operation

		Placing Outside Calls Using Line Keys		In these instructions:
				[Super Display Soft Key]
				[Keyset Soft Key]
To place an outside call over a specific line using a line key:
1.	Lift handset.
2.	Press line key.
	• You hear dial tone on the line you select and the line key lights green.
	• To use loop keys for placing calls, see Loop Keys (page 103).
3.	Dial outside number.
	Placing Outside Calls Using Line Dial-up or Direct Line Access			In these instructions:
				[Super Display Soft Key]
				[Keyset Soft Key]
To place an outside call over a specific line using a Line Dial-up or Direct Line Access:
1.	Lift handset.
2.	Press INTERCOM.
3.	Do one of the following:
	a.	For Line Dial-up:
			Dial #9 followed by the line number (e.g., 01 for line 1).
			• If you hear busy tone, you may be able to dial 2 to queue for the busy line.
	b.	For Direct Line Access:
			Dial 1 plus the line number (e.g., 01 for line 1).
			• If you hear busy tone, you may be able to dial 2 to queue for the busy line.
3.	Dial outside number.
		Placing Outside Calls Using Line Groups		In these instructions:
				[Super Display Soft Key]
				[Keyset Soft Key]

• By default, pressing Intercom and dialing 911 or lifting the handset and dialing 911 will not call emergency services.

To place an outside call over a Line Group:

1.	Lift handset.
2.	Press INTERCOM.
2.	Dial the Line Group code (90-98).
	• If you hear dial tone as soon as you dial 9, your system has Line Group Routing enabled. See Line Group
	Routing (page 98).
3.	Dial outside number.

34 ◆ Features DSX Feature Handbook