NEC P/N 1093099 manual Central Office Calls, Placing, Store and Forward

Models: P/N 1093099

1 190
Download 190 pages 28.35 Kb
Page 41
Image 41

Central Office Calls, Placing

Central Office Calls, Placing

Description

Customize the call placing options to meet the site requirements and each individual’s needs.

The system provides flexibility in the way each extension user can place outgoing calls. A user can place a call by:

Pressing a Line Key

Any keyset can have line keys for one-touch access to specific lines.

-See Line Keys on page 100 for more.

Pressing a Loop Key

Loop Keys provide a user with one-touch access to the assigned Loop Group. Loop Groups can consist of one or more Line Groups.

-See Loop Keys on page 103 for more.

Using Line Dial-Up

With Line Dial-Up, a user can select a specific line by pressing INTERCOM and dialing the Line Dial-Up code (#9) followed by the line number (1-64).

Using Direct Line Access

Direct Line Access allows a user to access a line by pressing INTERCOM and dialing the line’s exten- sion number (e.g., 101 for line 1, 102 for line 2. etc.).

-See Direct Line Access on page 43 for more.

Dialing a Line Group Access Code

User’s can also place outside calls by pressing INTERCOM and dialing a Line Group Access Code (90-98).

-See Line Groups on page 99 for more.

Line Group Routing

If the system has Line Group Routing enabled, user’s get the first available line when they press INTER- COM and dial 9.

-See Line Group Routing on page 98 for more.

Store and Forward

Store and Forward is an alternate method of placing outside calls in which the system stores (“collects”) the digits a user dials, waits for the user to finish dialing, and then redials the digits on the selected line. Store and forward provides Intercom dial tone to the caller as soon as they dial a line access code or press a loop key, similar to conventional ARS operation. When the user has completed dialing, the system will dial out the call over the connected line after 6 seconds or when the user dials #. Store and Forward can also be an advantage when connected to a T1 service that does not provide line dial tone.

Post dialing for Store and Forward calls is also available. After a user dials using Store and Forward, they can manually dial additional digits. The normal post dialing soft keys (such as AUTO REDIAL [ALND] for Auto Redial) are also enabled.

Store and Forward does not apply to line keys, Direct Line Access, or line dial up (i.e., #9 plus the line number).

You can use Account Codes with Store and Forward enabled (see Operation below).

Features

DSX Feature Handbook

Features 33

Page 41
Image 41
NEC P/N 1093099 manual Central Office Calls, Placing, Store and Forward