Speed Dial

 

 

 

 

 

 

Programming and Dialing System Speed Dial

In these instructions:

 

 

[Super Display Soft Key]

 

 

 

[Keyset Soft Key]

 

 

 

 

 

a.

Repeat from step 3 to program another bin.

 

 

 

 

 

 

b.

Press SPEAKER to exit.

 

 

 

 

 

 

 

To dial a stored System Speed Dial number:

 

 

 

 

 

1.

Do one of the following.

 

 

 

 

 

 

a.

Press INTERCOM, dial #, then dial the System Speed Dial bin number (normally 201-299).

 

 

 

 

 

c.

Press a Feature Key set up as a System Speed Dial key.

 

 

 

 

2.

(Optional)

• To chain bins, wait for the first bin to dial out, then press a bin key or Feature Key.

• If the programmed route is busy, press an idle line key to reroute the call.

 

 

 

 

 

 

 

 

 

 

 

 

User Programmable Features

Programming Personal Speed Dial

Feature

Mnemonic

Operation

Access Level

 

 

 

 

 

 

 

 

Speed Dial

#SP (#77)

#SP + Press bin key (for bins 701-710) + HOLD + Enter

1-5

 

 

outside line (e.g., 1), Line Group (90-98), or INTERCOM

 

 

 

for Intercom feature + HOLD + Number to store + HOLD

 

 

 

twice + Name + HOLD + Press another bin key or

 

 

 

SPEAKER to exit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Programming System Speed Dial

 

 

 

 

 

Feature

Mnemonic

Operation

Access Level

 

 

 

 

 

 

 

 

Speed Dial

#SP (#77)

#SP + Dial System Speed Dial bin number (e.g., 201) +

4-5

 

 

HOLD + Enter outside line (e.g., 1), Line Group (e.g., 90),

 

 

 

or INTERCOM for Intercom feature + HOLD + Number

 

 

 

to store + HOLD twice + Name + HOLD + Dial another

 

 

 

bin or SPEAKER to exit.

 

 

 

 

 

 

 

 

 

152 Features

DSX Feature Handbook

Page 160
Image 160
NEC P/N 1093099 manual User Programmable Features, Programming and Dialing System Speed Dial