Dialogic SS7G2X manual Mmlos MML Log Off Set, Mmptc MML Port Change

Chapter 6 Command Definitions

6.8.3MMLOS – MML Log Off Set

Synopsis

This command sets the current log-on time-out (TLO) and timeout warning (TLOW) parameters. If TLOW is set to zero, the automatic time-out is disabled. If port (PORT) is omitted, the command applies to all ports.

Syntax

MMLOS:{[TLO=,][TLOW=,]}[PORT=,];

Prerequisites

None

Attributes

CONFIG

Examples

MMLOS:TLO=35;

MMLOS:TLOW=19;

6.8.4MMPTC – MML Port Change

Synopsis

This command sets the data input/output parameters for serial and telnet data ports.

Note: Only serial port 2 (COM2) is accessible by the user.

Syntax

MMPTC:PORT=,{[BAUD=,][DBITS=,][PARITY=,][SBITS=,][LINES=,][PTMODE=,]};

Prerequisites

•No user must be logged on to the port affected.

•For the telnet ports, only the LINES parameter can be changed.

Attributes

CONFIG

Examples

MMPTC:PORT=2,BAUD=300;

MMPTC:PORT=2,SBITS=2;

82