Dialogic SS7G2X manual SCTP-Specific Timers, Board Types

Dialogic® SS7G2x Signaling Server SGW Mode User Manual Issue 4

Table 6. MTP3 ANSI Timers (Continued)

	Range	Default
TO	(milli-		Description
		(milliseconds)
	seconds)
6	500 to 1200	1000	Delay to avoid message mis-sequencing on controlled rerouting
10	30 to 60secs	45 sec.	Waiting to repeat signaling route set test message
12	800 to 1500	1200	Waiting for uninhibit acknowledgement
13	800 to 1500	1200	Waiting for force uninhibit
14	2000 to 3000	3000	Waiting to start signaling route set congestion test
17	800 to 1500	1000	Delay to avoid oscillation of initial alignment failure and link
			restart
21	N/A	N/A	Reserved
			Local inhibit test timer
22	180 to 360 sec.	270 sec.	NOTE: This timer is referred to as timer T20 in the ANSI
			specification.
			Remote inhibit test timer
23	180 to 360 sec.	270 sec.	NOTE: This timer is referred to as timer T21 in the ANSI
			specification.
24	N/A	N/A	Reserved

5.3.3SCTP-Specific Timers SCTP-specific timers are given in Table 7.

Table 7. SCTP-Specific Timers

TO	Range	Default	Description
	(milliseconds)	(milliseconds)
1	100 to 500	500	Minimum retransmission timeout (RTO)
2	100 to 60000	2000	Maximum retransmission timeout (RTO)
3	T1 to T2	1000	Retransmission timeout RTO initial value
4	100 to 3000	1000	SCTP Heartbeat timer

5.4Board Types

Table 8 shows the signaling board types.

Table 8. Board Types

BRDTYPE	Description
SPCI2S-4-2	SS7G2x(DSC) Signaling board with 4 signaling links configured and 2 PCMs. Used when
	configuring signaling boards with a SIGTYPE of SS7.
SPCI4-4-4	SS7G2x(DSC) Signaling board with 4 signaling links configured and 4 PCMs. Used when
	configuring signaling boards with a SIGTYPE of SS7.
SS7HDP-64-4	SS7G2x(DSC) Signaling board with 64 signaling links configured and 4 PCMs. Used when
	configuring signaling boards with a SIGTYPE SS7.

39