Dialogic® SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.13.1SNALI – SIGTRAN Application Server List Initiate
Synopsis
This command attaches a list of SIGTRAN links to an Application Server (AS). The SIGTRAN links provide the SCTP associations to reach the AS.
See Section 7.2, “Signaling Configuration” on page 136 for a more detailed description of SIGTRAN signaling configuration.
Syntax
SNALI:AS=,SEQ=,SNLINK=;
Prerequisites
•The AS has already been initiated.
•The specified SIGTRAN link has already been initiated.
•A SIGTRAN link cannot be specified in more than one hunt sequence position for this server.
•The server/hunt sequence combination must not already be initiated.
•The SIGTRAN links attached to the server must be M3UA and their peers be able to process ASs (that is, not act as Signaling Gateways).
•A SNLINK cannot be attached to more than 32 ASs.
•The SNTYPE of the SNLINK cannot be M2PA.
Attributes
CONFIG
Examples
SNALI:AS=1,SEQ=1,SNLINK=1;
6.13.2SNALE – SIGTRAN Application Server List End
Synopsis
This command ends a relationship between an Application Server (AS) and a SIGTRAN link.
Syntax
SNALE:AS=,SEQ=;
Prerequisites
•The AS sequence combination has already be initiated.
•The last entry in a list of SIGTRAN links attached to an AS cannot be removed unless the AS is blocked.
Attributes
CONFIG
Examples
SNALE:AS=,SEQ=;
115
