Tripp Lite SMART2200VSXL warranty Specifications, System Overview, Output, Input, Battery

multiple servers

4 built-in communications ports (2-DB9, 2-USB) for remote monitoring and unattended shutdown

Slot for SNMP/web card (part#: SNMPWEBCARD) and environmental sensor (part#: ENVIROSENSE) for remote communications in large IP environments

Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked computers by automatically switching UPS power off and back on again

Communication ports support on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status messaging. Interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment

3 individual customized load management receptacles can be individually powered off and back on again via software interface to reboot remote equipment or shed less critical loads to extend battery runtime for the most critical equipment

Built-in Emergency Power Off (EPO) interface supports emergency shutoff in large facilities

Hot-swappable/user replaceable batteries allow on-site battery replacement through the front panel without powering off connected equipment or removing the UPS from the rack

UPS battery set ships fully assembled and ready for use, no time consuming, connection of individual internal batteries by user is necessary

UL (USA), cUL (Canada), NOM (Mexico), FCC Class A

$250,000 Ultimate Lifetime Insurance. No warranty cards required for coverage! 2 year manufacturers product warranty

Specifications

SYSTEM OVERVIEW

Voltage compatibility	120V AC
Frequency	60 Hz
compatibility
OUTPUT
Output VA	2200
Output watts	1600
Output nominal	120V AC
voltage
Output voltage	LINE MODE: Sine wave line voltage 120V (-18% / +8%), BATTERY MODE: PWM sine wave output 120V +/-5%
regulation
Output frequency	LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz
regulation
Outlet quantity / type	7 NEMA 5-15R, 2 NEMA 5-20R and 1 NEMA L5-20R
Customized load	"3 individually controllable outlets support load shedding and remote reboot on demand of locked network devices.
management	Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for servers
receptacles	and other critical devices. "
Overload protection	20A input circuit breaker
INPUT
Maximum input amps	16A / 1840 watts
Input connection type	NEMA 5-20P
Input cord length	8 ft., 12 gauge
Recommended	20A 120V
Electrical Service
BATTERY
Full load runtime	7 minutes (2200VA)
Half load runtime	19 minutes (1100VA)
Expandable battery	Runtime is expandable with BP48V24-2U (limit 1) or BP48V60RT3U (multi-pack compatible) external battery packs
runtime

DC system voltage

48 VDC