Agilent Technologies E4406A VSA manual Adjacent Channel Power—SpectrumTrace Control

	Language Reference
	SENSe Subsystem
Remarks:	You must be in Basic, cdmaOne mode to use this
	command. Use INSTrument:SELect to set the mode.

Adjacent Channel Power—Spectrum Trace Control

[:SENSe]:ACP:SPECtrum:ENABle OFFON01

[:SENSe]:ACP:SPECtrum:ENABle?

Turns on/off the measurement of the spectrum trace data when the spectrum view is selected. (Select the view with DISPlay:ACP:VIEW.) You may want to disable the spectrum trace data part of the measurement so you can increase the speed of the rest of the measurement data.

Factory Preset
and *RST:	ON
Remarks:	You must be in Basic, cdmaOne, iDEN mode to use this
	command. Use INSTrument:SELect to set the mode.
History:	Revision A.03.27 or later, in cdmaOne revision A.04.00

Adjacent Channel Power—Sweep Mode Resolution Bandwidth

[:SENSe]:ACP:SWEep:BANDwidthBWIDth[:RESolution] <freq>

[:SENSe]:ACP:SWEep:BANDwidthBWIDth[:RESolution]?

Sets the resolution bandwidth when using the spectrum analyzer type sweep mode. See [:SENSe]:ACP:SWEep:TYPE.

Factory Preset
and *RST:	Auto coupled.
Range:	1.0 kHz to 1.0 MHz
Resolution:	1.0 kHz
Step Size:	1.0 kHz
Default Unit:	Hz
Remarks:	You must be in the cdmaOne cdma2000, W-CDMA
	(3GPP), or W-CDMA (Trial & Arib) mode to use this
	command. Use INSTrument:SELect to set the mode.

Chapter 5 313