Agilent Technologies E4406A VSA manual Power vs. Time—TriggerSource, SENSe:PVTime:TRIGger:SOURce?

Language Reference

SENSe Subsystem

burst edges.
Factory Preset
and *RST:	1
Range:	1 to 50 (for resolution BW = 500 kHz)
Remarks:	You must be in the EDGE(w/GSM), GSM or Service
	mode to use this command. Use INSTrument:SELect to
	set the mode.

Power vs. Time—Trigger Source

[:SENSe]:PVTime:TRIGger:SOURce EXTernal[1]EXTernal2 FRAMeIFIMMediateRFBurst

[:SENSe]:PVTime:TRIGger:SOURce?

Select the trigger source used to control the data acquisitions.

EXTernal 1 - front panel external trigger input

EXTernal 2 - rear panel external trigger input

FRAMe - uses the internal frame timer, which has been synchronized to the selected burst sync.

IF - internal IF envelope (video) trigger

IMMediate - the next data acquisition is immediately taken, capturing the signal asynchronously (also called Free Run).

RFBurst - wideband RF burst envelope trigger that has automatic level control for periodic burst signals.

Factory Preset
and *RST:	RFBurst if the RF Burst Hardware (option B7E) has
	been installed
	EXTernal if option B7E has not been installed
Remarks:	You must be in the EDGE(w/GSM), GSM or Service
	mode to use this command. Use INSTrument:SELect to
	set the mode.

338 Chapter 5