Agilent Technologies E4406A VSA manual Using HP/Agilent VEE Over Socket LAN, page, Figure

Programming Fundamentals

Using the LAN to Control the Analyzer

Using HP/Agilent VEE Over Socket LAN

To control your analyzer via socket LAN using VEE, click on the VEE menu titled "I/O." Then select "To/From Socket" and position the I/O object box on the screen. Fill in the following fields:

	Connect Port:	5025
	Host Name:	<hostname>
	Timeout:	15
	For faster troubleshooting, you may want to set the timeout to a smaller
	number. If the hostname you enter doesn’t work, try using the IP
	address of your analyzer (example: 15.4.43.5). Using the IP address
	rather than the hostname may also be faster. See Figure 2-6for an
	example of an VEE screen.
	If you need to control the GPIB using “device clear” or SRQ’s, you can
NOTE
	use SICL LAN. SICL LAN provides control of your analyzer via IEEE
	488.2 GPIB. See See “Using SICL LAN to Control the Analyzer” on
	page 95.
Figure 2-6	Sample VEE Screen

Chapter 2 103