Agilent Technologies E4406A VSA manual SENSe:ACP:LIST:ALIMit?, SENSe:ACP:LIST:FREQuency

Language Reference

SENSe Subsystem

Adjacent Channel Power—Offset Frequency Absolute Limit

[:SENSe]:ACP:LIST:ALIMit

<abs_powr>,<abs_powr>,<abs_powr>,<abs_powr>,<abs_powr>

[:SENSe]:ACP:LIST:ALIMit?

Set the absolute limit on offset frequencies relative to the carrier. You can turn off (not use) specific offsets with the [:SENSe]:ACP:LIST:STATe command.

Factory Preset and *RST:

Mode	Offset A	Offset B	Offset C	Offset D	Offset E
NADC	0 dBm	0 dBm	−13 dBm	0 dBm	0 dBm
PDC	0 dBm	0 dBm	0 dBm	0 dBm	0 dBm

Range:	−200 to 50 dBm
Remarks:	You must be in the NADC, cdmaOne, or PDC mode to
	use this command. Use INSTrument:SELect to set the
	mode.

Adjacent Channel Power—Offset Frequency

[:SENSe]:ACP:LIST[:FREQuency]

<f_offset>,<f_offset>,<f_offset>,<f_offset>,<f_offset>

[:SENSe]:ACP:LIST[:FREQuency]?

Define the offset frequencies. You can turn off (not use) specific offsets with the [:SENSe]:ACP:LIST:STATe command.

Factory Preset and *RST:

Mode	Offset A	Offset B	Offset C	Offset D	Offset E
NADC	30 kHz	60 kHz	90 kHz	120 kHz	0 Hz
PDC	50 kHz	100 kHz	0 kHz	0 kHz	0 kHz
Range:	10 Hz to 45 MHz
	0 to 200 kHz
Default Unit:	Hz
Remarks:	You must be in the NADC, cdmaOne, or PDC mode to
	use this command. Use INSTrument:SELect to set the
	mode.

Chapter 5 293