Agilent Technologies E4406A VSA manual INPut Subsystem, Baseband I/Q - Select Input Impedance

Language Reference

INPut Subsystem

INPut Subsystem

The INPut subsystem controls the characteristics of all the instrument input ports.

The INPut subsystem controls the characteristics of all the instrument input ports.

Baseband I/Q - Select Input Impedance

:INPut:IMPedance:IQ U50B600U1MB1M

:INPut:IMPedance:IQ?

Selects the characteristic input impedance when input port is set to I or Q. This is the impedance value as well as the unbalanced (U) or balanced (B) impedence mode.

1000000 or 1E6 sets input impedance to 1 M ohm.

Factory Preset
and *RST:	U1M
Remarks:	You must be in the Basic, W-CDMA, cdma2000 mode to
	use this command. Use INSTrument:SELect to set the
	mode.
History:	Added revision A.05.00

Baseband I/Q - Select Input Impedance Reference

:INPut:IMPedance:REFerence <integer>

:INPut:IMPedance:REFerence ?

Sets the value of the input impedance reference when input port is set to I or Q.

1000000 or 1E6 sets input impedance to 1 M ohm.

Range:	1 to 10,000,000.
Default Units:	ohm
Remarks:	You must be in the Basic, W-CDMA, cdma2000 mode to
	use this command. Use INSTrument:SELect to set the
	mode.
History:	Added revision A.05.00

Chapter 5 249