Agilent Technologies E4406A VSA Adjacent Channel Power—Numberof Measured Points, 64 to, Range

Language Reference

SENSe Subsystem

Adjacent Channel Power—Number of Measured Points

[:SENSe]:ACP:OFFSet:LIST:POINts

<integer>,<integer>,<integer>,<integer>,<integer>

[:SENSe]:ACP:OFFSet:LIST:POINts?

Selects the number of data points. The automatic mode chooses the optimum number of points for the fastest measurement time with acceptable repeatability. The minimum number of points that could be used is determined by the sweep time and the sampling rate. You can increase the length of the measured time record (capture more of the burst) by increasing the number of points, but the measurement will take longer. Use [:SENSe]:ACP:POINts to set the number of points used for measuring the reference channel.

Factory Preset and *RST:

Mode	Offset A	Offset B	Offset C	Offset D	Offset E
Basic &	1024	1024	1024	1024	1024
cdmaOne
Range:	64 to 65536
Remarks:	The fastest measurement times are obtained when the
	number of points measured is 2n.

You must be in Basic, cdmaOne mode to use this command. Use INSTrument:SELect to set the mode.

Adjacent Channel Power—Automatic Measurement Points

[:SENSe]:ACP:OFFSet:LIST:POINts:AUTO OFFON01, OFFON01, OFFON01, OFFON01, OFFON01

[:SENSe]:ACP:OFFSet:LIST:POINts:AUTO?

Automatically selects the number of points for the optimum measurement speed.

Factory Preset and *RST:

Mode	Offset A	Offset B	Offset C	Offset D	Offset E
Basic &	ON	ON	ON	ON	ON
cdmaOne
Remarks:	You must be in Basic or cdmaOne mode to use this
	command. Use INSTrument:SELect to set the mode.

302 Chapter 5