Channel Burst Type

	Language Reference
	SENSe Subsystem
	511 for GSM700
	251 for GSM850
Remarks:	You must be in the EDGE(w/GSM), GSM mode to use
	this command. Use INSTrument:SELect to set the
	mode.
	Global to the current mode.
History:	Version A.03.00 or later
Front Panel
Access:	FREQUENCY Channel, BMT Freq

Burst Type

[:SENSe]:CHANnel:BURSt?

Set the burst type for mobile station testing.

Traffic Channel (TCH) – burst for traffic channel

Control Channel (CCH) – burst for control channel

Factory Preset
and *RST:	TCH
Remarks:	The command is only applicable for mobile station
	testing, device = MS.
	You must be in the NADC or PDC mode to use this
	command. Use INSTrument:SELect to set the mode.

Set the burst type that the analyzer will search for and to which it will sync. This only applies with normal burst selected.

NORMal: Traffic Channel (TCH) and Control Channel (CCH)

SYNC: Synchronization Channel (SCH)

ACCess: Random Access Channel (RACH)

Remarks:	Global to the current mode.
	You must be in the EDGE(w/GSM), GSM mode to use
	this command. Use INSTrument:SELect to set the
	mode.

Chapter 5

321