Agilent Technologies E4406A VSA RF Port Power Range Auto, SENSe:POWer:RF:RANGe:AUTO OFF|ON|0|1

Models: E4406A VSA

1 406
Download 406 pages 63.49 Kb
Page 332
Image 332
RF Port Power Range Auto

Language Reference

SENSe Subsystem

RF Port Power Range Auto

[:SENSe]:POWer[:RF]:RANGe:AUTO OFFON01

[:SENSe]:POWer[:RF]:RANGe:AUTO?

Select the RF port power range to be set either automatically or manually.

ON - power range is automatically set as determined by the actual measured power level at the start of a measurement.

OFF - power range is manually set

Factory Preset

 

and *RST:

ON

Remarks:

You must be in the cdmaOne, EDGE(w/GSM), GSM,

 

NADC, PDC, cdma2000, W-CDMA (3GPP), or W-CDMA

 

(Trial & Arib) mode to use this command. Use

 

INSTrument:SELect to set the mode.

Front Panel

 

Access:

Input, Max Total Pwr (at UUT)

RF Port Power Range Maximum Total Power

[:SENSe]:POWer[:RF]:RANGe[:UPPer] <power>

[:SENSe]:POWer[:RF]:RANGe[:UPPer]?

Set the maximum expected total power level at the radio unit under test. This value is ignored if RF port power range is set to auto. External attenuation required above 30 dBm.

Factory Preset

15.0 dBm

and *RST:

Range:

100.0 to 80.0 dBm for EDGE, GSM

 

100.0 to 27.7 dBm for cdmaOne, iDEN

 

200.0 to 50.0 dBm for NADC, PDC

 

200.0 to 100.0 dBm for cdma2000, W-CDMA (3GPP),

 

W-CDMA (Trial & Arib)

Default Unit:

dBm

Remarks:

Global to the current mode. This is coupled to the RF

 

input attenuation

 

You must be in the Service, cdmaOne, EDGE(w/GSM),

 

GSM, NADC, PDC, cdma2000, W-CDMA (3GPP), or

 

W-CDMA (Trial & Arib) mode to use this command.

 

Use INSTrument:SELect to set the mode.

332

Chapter 5

Page 332
Image 332
Agilent Technologies E4406A VSA RF Port Power Range Auto, SENSe:POWer:RF:RANGe:AUTO OFF|ON|0|1, SENSe:POWer:RF:RANGe:AUTO?