Agilent Technologies E4406A VSA manual ABORt Subsystem, Abort Command

Language Reference

ABORt Subsystem

ABORt Subsystem

Abort Command

:ABORt

Stops any sweep or measurement in progress and resets the sweep or trigger system. A measurement refers to any of the measurements found in the MEASURE menu.

If :INITiate:CONTinuous is off (single measure), then :INITiate:IMMediate will start a new single measurement.

If :INITiate:CONTinuous is on (continuous measure), a new continuous measurement begins immediately.

The INITiate and/or TRIGger subsystems contain additional related commands.

Front Panel

Access: For the continuous measurement mode, the Restart key is equivalent to ABORt.

Chapter 5 193