Agilent Technologies E4406A VSA SENSe:ACP:SWEep:TIME:AUTO OFF|ON|0|1, SENSe:ACP:SWEep:TIME:AUTO?

Language Reference

SENSe Subsystem

Selecting a specific sweep time may result in a long measurement time

since the resulting number of data points my not be the optimum 2n. Use [:SENSe]:ACP:OFFSet:LIST:SWEep:TIME to set the number of points used for measuring the offset channels for Basic and cdmaOne.

For cdma2000 and W-CDMA, this command sets the sweep time when using the sweep mode. See [:SENSe]:ACP:SWEep:TYPE.

Factory Preset	625 ∝s (1 slot) for W-CDMA (3GPP), W-CDMA (Trial &
and *RST:
	Arib)
	1.25 ms for cdma2000
	11.20 ms for Basic, cdmaOne
Range:	500 ∝s to 10 ms
	1 ∝s to 50 ms for Basic, cdmaOne
Default Unit:	seconds
Remarks:	You must be in the Basic, cdmaOne, cdma2000,
	W-CDMA (3GPP), or W-CDMA (Trial & Arib) mode to
	use this command. Use INSTrument:SELect to set the
	mode.
History:	Added to Basic revision A.03.00, to cdmaOne revision
	A.04.00

Adjacent Channel Power—Automatic Sweep Time

[:SENSe]:ACP:SWEep:TIME:AUTO OFFON01

[:SENSe]:ACP:SWEep:TIME:AUTO?

Sets the sweep time to be automatically coupled for the fastest measurement time.

Factory Preset
and *RST:	ON
Remarks:	You must be in Basic, cdmaOne mode to use this
	command. Use INSTrument:SELect to set the mode.
History:	Revision A.03.00 or later, in cdmaOne revision A.04.00

Adjacent Channel Power—Sweep Type

W-CDMA (3GPP) mode

[:SENSe]:ACP:SWEep:TYPE FASTFFTSWEep

[:SENSe]:ACP:SWEep:TYPE?

Chapter 5 315