Agilent Technologies E4406A VSA Color Hard Copy, Print a Hard Copy, Form Feed the Print Item

Language Reference

HCOPy Subsystem

Color Hard Copy

:HCOPy:IMAGe:COLor[:STATe] OFFON01

:HCOPy:IMAGe:COLor[:STATe]?

Selects between color and monochrome mode for hard copy output. You must set HCOP:DEV:COLOR YES before using this command.

Factory Preset

and *RST: On. This parameter is persistent, which means that it retains the setting previously selected, even through a power cycle.

Remarks: Revision A.04.00 and later

Front Panel

Access: Print Setup, (select Print To:Printer), Color

Print a Hard Copy

:HCOPy[:IMMediate]

The entire screen image is output to the printer at the parallel port.

Front Panel

Access: Print

Form Feed the Print Item

:HCOPy:ITEM:FFEed[:IMMediate]

Sends the printer a command to form feed. No form feed will occur unless the printer has only printed one image of a multi-image printout.

History: Revision A.04.00 and later

Front Panel

Access: Print Setup, (select Print To:Printer), More, Eject Page

Page Orientation

:HCOPy:PAGE:ORIentation LANDscapePORTrait

:HCOPy:PAGE:ORIentation?

Specifies the orientation of the print image.

Chapter 5 243