Agilent Technologies E4406A VSA INSTrument:SELect to set the mode, Revision A.03.00 or later

Language Reference

SENSe Subsystem

Factory Preset and *RST:

Mode	Offset A	Offset B	Offset C	Offset D	Offset E
Basic &	ON	ON	ON	ON	ON
cdmaOne
Remarks:	You must be in Basic mode to use this command. Use
	INSTrument:SELect to set the mode.
History:	Revision A.03.00 or later

Adjacent Channel Power—Define Offset Frequency List

iDEN mode

[:SENSe]:ACP:OFFSet[:FREQuency] <f_offset>

[:SENSe]:ACP:OFFSet[:FREQuency]?

Basic mode, cdmaOne

[:SENSe]:ACP:OFFSet:LIST[:FREQuency]

<f_offset>,<f_offset>,<f_offset>,<f_offset>,<f_offset>

[:SENSe]:ACP:OFFSet:LIST[:FREQuency]?

cdma2000, W-CDMA (3GPP) mode

[:SENSe]:ACP:OFFSet[n]:LIST[:FREQuency]

<f_offset>,<f_offset>,<f_offset>,<f_offset>,<f_offset>

[:SENSe]:ACP:OFFSet[n]:LIST[:FREQuency]?

cdmaOne, W-CDMA (Trial & Arib) mode

[:SENSe]:ACP:OFFSet[n]:LIST[n][:FREQuency]

<f_offset>,<f_offset>,<f_offset>,<f_offset>,<f_offset>

[:SENSe]:ACP:OFFSet[n]:LIST[n][:FREQuency]?

Define the custom set of offset frequencies at which the switching transient spectrum part of the ACP measurement will be made. The list contains five (5) entries for offset frequencies. Each offset frequency in the list corresponds to a reference bandwidth in the bandwidth list.

An offset frequency of zero turns the display of the measurement for that offset off, but the measurement is still made and reported. You can turn off (not use) specific offsets with the [:SENSe]:ACP:OFFSet:LIST:STATe command.

Offset[n]	n=1 is base station and 2 is mobiles. The default is base
	station (1).

300 Chapter 5