Agilent Technologies E4406A VSA manual SERVice Subsystem, Prepare Calibration Files for Access

Models: E4406A VSA

1 406
Download 406 pages 63.49 Kb
Page 364
Image 364
SERVice Subsystem

Language Reference

SERVice Subsystem

SERVice Subsystem

Provides SCPI access for the calibration manager.

Numeric values for bit patterns can be entered using decimal or hexidecimal representations. (i.e. 0 to 32767 is equivalent to #H0 to #H7FFF) See the SCPI Basics information about using bit patterns for variable parameters.

Prepare Calibration Files for Access

:SERVice[:PRODuction]:CALibrate:BEGin

Locks all of the calibration files for memory accesses.

Remarks:

No query.

Load Default Calibration Data to NRAM

:SERVice[:PRODuction]:CALibrate:DEFault <cal_fid>

Loads the specified calibration data from EEROM to NRAM, initializing the alignment data to the factory defaults..

Range:

cal_fid, corresponds to the Calibrate file ID

Remarks:

No query.

Unlock Calibration Files

:SERVice[:PRODuction]:CALibrate:END

Unlocks all of the calibration files.

Remarks: info

Store Calibration Data in EEROM

:SERVice[:PRODuction]:CALibrate:STORe <cal_fid>

Stores the specified calibration data into EEROM. The data will survive power cycles and will be reloaded into NRAM on power up.

Range:

cal_fid, corresponds to the calibration data file ID

Remarks:

No query.

364

Chapter 5

Page 364
Image 364
Agilent Technologies E4406A VSA manual SERVice Subsystem, Prepare Calibration Files for Access, Unlock Calibration Files