Agilent Technologies E4406A VSA manual Adjacent Channel Power Ratio ACP Measurement, MEASure:ACPn?

Language Reference

MEASure Group of Commands

Adjacent Channel Power Ratio (ACP) Measurement

This measures the total rms power in the specified channel and in 5 offset channels. You must be in Basic, cdmaOne, cdma2000, W-CDMA (3GPP), W-CDMA (Trial & Arib), iDEN, NADC or PDC mode to use these commands. Use INSTrument:SELect to set the mode.

The general functionality of CONFigure, FETCh, MEASure, and READ are described at the beginning of this section. See the SENSe:ACP commands for more measurement related commands.

:CONFigure:ACP

:FETCh:ACP[n]?

:READ:ACP[n]?

:MEASure:ACP[n]?

For Basic mode, a channel frequency and power level can be defined in the command statement to override the default standard setting. A comma must precede the power value as a place holder for the frequency when no frequency is sent.

	History:		Added to Basic mode, version A.03.00 or later
	Front Panel		Measure, ACP or ACPR
	Access:
			After the measurement is selected, press Restore Meas
			Defaults to restore factory defaults.
	Measurement Results Available
Measurement	n	Results Returned
Type
	0	Returns unprocessed I/Q trace data, as a series of
		comma-separated trace points, in volts. The I values are listed
		first in each pair, using the 0 through even-indexed values. The
		Q values are the odd-indexed values.
	not	Returns 22 comma-separated scalar results, in the following
	specified	order:
	or n=1	1.	Center frequency – absolute power (dBm)
	NADC and
		2.	Center frequency – absolute power (W)
	PDC mode	3.	Negative offset frequency (1) – relative power (dB)
		4.	Negative offset frequency (1) – absolute power (dBm)
		5.	Positive offset frequency (1) – relative power (dB)
		6.	Positive offset frequency (1) – absolute power (dBm)
			. . .
		1.	Positive offset frequency (5) – relative power (dB)
		2.	Positive offset frequency (5) – absolute power (dBm)

Chapter 5 259