Adjacent Channel Power—SelectSideband | Agilent Technologies E4406A VSA

Language Reference

SENSe Subsystem

Mode	Variant	Offset A	Offset B	Offset C	Offset D	Offset E

cdma2000		0 dB	0 dB	0 dB	0 dB	0 dB

W-CDMA	BTS	−44.2 dBc	−49.2 dBc	−49.2 dBc	−49.2 dBc	−44.2 dBc
(3GPP)
(3GPP)	MS	−32.2 dBc	−42.2 dBc	−42.2 dBc	−42.2 dBc	−42.2 dBc
	MS	−32.2 dBc	−42.2 dBc	−42.2 dBc	−42.2 dBc	−42.2 dBc

W-CDMA (Trial		0 dB	0 dB	0 dB	0 dB	0 dB
& Arib)

	Range:	−150.0 dB to 50.0 dB for cdmaOne, Basic, cdma2000,
		W-CDMA (3GPP), W-CDMA (Trial & Arib)
		−200.0 dB to 50.0 dB for iDEN
	Default Unit:	dB
	Remarks:	You must be in Basic, cdmaOne, cdma2000, W-CDMA
		(3GPP), W-CDMA (Trial & Arib), or iDEN mode to use

this command. Use INSTrument:SELect to set the mode.

Adjacent Channel Power—Select Sideband

[:SENSe]:ACP:OFFSet:LIST:SIDE BOTHNEGativePOSitive, BOTHNEGativePOSitive, BOTHNEGativePOSitive, BOTHNEGativePOSitive, BOTHNEGativePOSitive

Selects which sideband will be measured. You can turn off (not use) specific offsets with the SENS:ACP:OFFSet:LIST:STATe command.

Factory Preset and *RST:

Mode	Offset A	Offset B	Offset C	Offset D	Offset E

Basic &	BOTH	BOTH	BOTH	BOTH	BOTH
cdmaOne

Remarks:	You must be in Basic or cdmaOne mode to use this
	command. Use INSTrument:SELect to set the mode.

Chapter 5

307