Agilent Technologies E4406A VSA SENSe:ACP:OFFSet:LIST:RPSDensity?, cdma2000, W-CDMA3GPP mode

Language Reference

SENSe Subsystem

[:SENSe]:ACP:OFFSet:LIST:RPSDensity?

cdma2000, W-CDMA (3GPP) mode

[:SENSe]:ACP:OFFSet[n]:LIST:RPSDensity

<rel_power>,<rel_power>,<rel_power>,<rel_power>,<rel_power>

[:SENSe]:ACP:OFFSet[n]:LIST:RPSDensity?

cdmaOne, W-CDMA (Trial & Arib) mode

[:SENSe]:ACP:OFFSet[n]:LIST[n]:RPSDensity

<rel_power>,<rel_power>,<rel_power>,<rel_power>,<rel_power>

[:SENSe]:ACP:OFFSet[n]:LIST[n]:RPSDensity?

Sets the amplitude levels to test against for any custom offsets. This amplitude level is relative to the power spectral density. If multiple offsets are available, the list contains five (5) entries. The offset closest to the carrier channel is the first one in the list. [:SENSe]:ACP:OFFSet[n]:LIST[n]:TEST selects the type of testing to be done at each offset.

You can turn off (not use) specific offsets with the [:SENSe]:ACP:OFFSet[n]:LIST:STATe command.

The query returns five (5) real numbers that are the current amplitude test limits, relative to the power spectral density, for each offset.

Offset[n]	n=1 is base station and 2 is mobiles. The default is base
	station (1).
List[n]

cdmaOne mode n=1 is cellular bands and 2 is pcs bands. The default is cellular.

W-CDMA (Trial

&Arib) mode n=1 is ARIB, 2 is 3GPP, and 3 is Trial. The default is ARIB (1).

Factory Preset and *RST:

Mode	Variant	Offset A	Offset B	Offset C	Offset D	Offset E
iDEN		0 dB	n/a	n/a	n/a	n/a
Basic		−28.87 dB	−43.87 dB	0 dB	0 dB	0 dB
cdmaOne	BS cellular	−28.87 dB	−43.87 dB	0 dB	0 dB	0 dB
	BS pcs	−28.87 dB	0 dB	0 dB	0 dB	0 dB
	MS cellular	−25.87 dB	−37.87 dB	0 dB	0 dB	0 dB
	MS pcs	−25.87 dB	0 dB	0 dB	0 dB	0 dB

306 Chapter 5