Agilent Technologies E4406A VSA manual

		Programming Command Cross References
			Functional Sort of SCPI Commands
Function	SCPI Command Subsystems		Remarks
Input/Output/	INPut:IMPedance
Configuration	SYSTem:CONFigure
	SYStem:COMMunicate
Markers	CALCulate:<measurement>:MARKer:		Not all measurements:
			1. have markers available
			2. have all the documented
			markers, or all the marker
			functions.
Measurements:	ABORt
control	INITiate:IMMediate
	INITiate:CONTinuous
	INItiate:RESTart
Measurements:	INSTrument:SELect		Modes include Basic,
select mode			Service, GSM, and CDMA.
Measurements:	SENSe:CHANnel:TSCode		Mode setup parameters are
mode setup	SENSe:CORRection:BTS		used for all the
	SENSe:CORRection:BS		measurements available
	SENSe:FREQuency:CENTer		within that mode.
	SENSe:POWer[:RF]		Mode setup parameters
	SENSe:RADio:CARRier
			persist if you go to a
	SENSe:RADio:STANdard
			different mode and then
	SENSe:SYNC
			return to a previous mode.
Measurements:	CONFigure:<measurement>		Information about the
select	FETCh:<measurement>		types of data available for a
measurement	MEASure:<measurement>		measurement is in
	READ:<measurement>		MEASure description.
Measurements:	SENSe:AVERage:
measurement	SENSe:BANDwidth:
setup	SENSe:FREQuency:
	SENSe:SWEep:
	SENSe:TRIGger:
	TRIGger:

Chapter 4 183