Agilent Technologies E4406A VSA manual Channel Power—AveragingState, SENSe:CHPower:AVERage:STATe?

	Language Reference
	SENSe Subsystem
Factory Preset
and *RST:	20
	200, for W-CDMA, W-CDMA (Trial & Arib)
Range:	1 to 10,000
Remarks:	You must be in the cdmaOne, cdma2000, W-CDMA
	(3GPP), W-CDMA (Trial & Arib), or Basic mode to use
	this command. Use INSTrument:SELect to set the
	mode.

Channel Power—Averaging State

[:SENSe]:CHPower:AVERage[:STATe] OFFON01

[:SENSe]:CHPower:AVERage[:STATe]?

Turn averaging on or off.

Factory Preset
and *RST:	ON
Remarks:	You must be in the cdmaOne, cdma2000, W-CDMA
	(3GPP), W-CDMA (Trial & Arib), or Basic mode to use
	this command. Use INSTrument:SELect to set the
	mode.

Channel Power—Averaging Termination Control

[:SENSe]:CHPower:AVERage:TCONtrol EXPonentialREPeat

[:SENSe]:CHPower:AVERage:TCONtrol?

Select the type of termination control used for the averaging function. This determines the averaging action after the specified number of data acquisitions (average count) is reached.

EXPonential - Each successive data acquisition after the average count is reached, is exponentially weighted and combined with the existing average.

REPeat - After reaching the average count, the averaging is reset and a new average is started.

Factory Preset
and *RST:	REPeat
Remarks:	You must be in the cdmaOne, cdma2000, W-CDMA
	(3GPP), W-CDMA (Trial & Arib), or Basic mode to use
	this command. Use INSTrument:SELect to set the
	mode.

Chapter 5 325