Agilent Technologies E4406A VSA manual Save, Service Request Enable, Read Status Byte Query, Stb?

Language Reference

Common IEEE Commands

The :SYSTem:PRESet command is equivalent to a front panel Preset. The front panel Preset sets instrument parameters to values for good front panel usage in the current mode. The *RST and front panel Preset will be different. For example, the *RST will place the instrument in single sweep while the front panel Preset will place the instrument in continuous sweep.

Front Panel

Access: Preset

Save

*SAV <register>

This command saves the instrument state to the specified instrument memory register.

Range:	Registers are an integer, 0 to 19
Front Panel
Access:	File, Save State

Service Request Enable

*SRE <integer>

*SRE?

This command sets the value of the service request enable register.

The query returns the value of the register.

Range: Integer, 0 to 63, or 128 to 191

Read Status Byte Query

*STB?

Returns the value of the status byte register without erasing its contents.

Remarks: See *CLS

Chapter 5 191