Agilent Technologies E4406A VSA manual Questionable Calibration Negative Transition

Language Reference

STATus Subsystem

NOTE	The register requires that the associated PTR or NTR filters be set
	before a condition register bit can set a bit in the event register.
	The data in this register is latched until it is queried. Once queried, the
	register is cleared.
	Key Type:	There is no equivalent front panel key.

Questionable Calibration Negative Transition

:STATus:QUEStionable:CALibration:NTRansition <number>

:STATus:QUEStionable:CALibration:NTRansition?

This command determines what bits in the Questionable Calibration Condition register will set the corresponding bit in the Questionable Calibration Event register when the condition register bit has a negative transition (1 to 0). The variable <number> is the sum of the decimal values of the bits that you want to enable.

Key Type:	There is no equivalent front panel key.
Factory Preset
and *RST:	0
Range:	0 to 32767

Questionable Calibration Positive Transition

:STATus:QUEStionable:CALibration:PTRansition <number>

:STATus:QUEStionable:CALibration:PTRansition?

This command determines what bits in the Questionable Calibration Condition register will set the corresponding bit in the Questionable Calibration Event register when the condition register bit has a positive transition (0 to 1). The variable <number> is the sum of the decimal values of the bits that you want to enable.

Key Type:	There is no equivalent front panel key.
Factory Preset
and *RST:	32767 (all 1’s)
Range:	0 to 32767

370 Chapter 5