Agilent Technologies E4406A VSA manual SENSeACPOFFSetnLISTABSolute?

Language Reference

SENSe Subsystem

[:SENSe]:ACP:OFFSet[n]:LIST:ABSolute?

W-CDMA (Trial & Arib) mode

[:SENSe]:ACP:OFFSet[n]:LIST[m]:ABSolute

<power>,<power>,<power>,<power>,<power>

[:SENSe]:ACP:OFFSet[n]:LIST[m]:ABSolute?

Sets the absolute amplitude levels to test against for each of the custom offsets. The list must contain five (5) entries. If there is more than one offset, the offset closest to the carrier channel is the first one in the list. [:SENSe]:ACP:OFFSet[n]:LIST[m]:TEST selects the type of testing to be done at each offset.

You can turn off (not use) specific offsets with the [:SENSe]:ACP:OFFSet[n]:LIST:STATe command.

The query returns five (5) real numbers that are the current absolute amplitude test limits.

Offset[n]	n=1 is base station and 2 is mobiles. The default is base
	station (1).
List[m]

cdmaOne mode m=1 is cellular bands and 2 is pcs bands. The default is cellular.

W-CDMA (Trial

&Arib) mode m=1 is ARIB, 2 is 3GPP, and 3 is Trial. The default is ARIB (1).

Factory Preset and *RST:

Mode	Variant	Offset A	Offset B	Offset C	Offset D	Offset E
Basic		0 dBm	0 dBm	0 dBm	0 dBm	0 dBm
cdmaOne	BS cellular	0 dBm	0 dBm	0 dBm	0 dBm	0 dBm
	BS pcs	0 dBm	−13 dBm	−13 dBm	0 dBm	0 dBm
	MS cellular	0 dBm	0 dBm	0 dBm	0 dBm	0 dBm
	MS pcs	0 dBm	−13 dBm	−13 dBm	0 dBm	0 dBm
cdma2000		50 dBm	50 dBm	50 dBm	50 dBm	50 dBm
W-CDMA		50 dBm	50 dBm	50 dBm	50 dBm	50 dBm
(3GPP)
W-CDMA (Trial		50 dBm	50 dBm	50 dBm	50 dBm	50 dBm
& Arib)
iDEN		0 dBm	n/a	n/a	n/a	n/a

296 Chapter 5