Agilent Technologies E4406A VSA manual Installing Optional Measurement Personalities

Preparing for Use

Installing Optional Measurement Personalities

Installing Optional Measurement

Personalities

When you install a measurement personality, you follow a two step process.

1.Install the measurement personality firmware into the instrument memory. See “Loading an Optional Measurement Personality” on page 42.

2.Enter a license key number that activates the measurement personality. See “Installing a License Key” on page 43.

Adding additional measurement personalities requires purchasing a retrofit kit for the desired option. The retrofit kit contains the measurement personality firmware and a license key certificate. It documents the license key number that is for your specific option and instrument serial number.

Available Measurement Personality Options

Available Personality Optionsa	Option
GSM measurement personality	BAH
EDGE (with GSM) measurement personalityb	202
cdmaOne measurement personality	BAC
NADC, PDC measurement personalities	BAE
iDEN measurement personality	HN1
W-CDMA measurement personality	BAF
cdma2000 measurement personality	B78

a. Available as of the print date of this guide.

b. For instruments that already have Option BAH licensed, order E4406AU Option 252 to add EDGE (with GSM).

You need two pieces of information about your instrument to order a retrofit kit adding an option. You need the Host ID, and the instrument serial number. You may also want/need to add optional memory.

Required Information:	Key Path:
Host ID:	System, Show System
__________________

Chapter 1 41