Samsung SCX-4321, SCX-4521F manual Changing the Default Settings, Setting the Time Out Option

Changing the Default Settings

The copy options, including darkness, original type, copy size and number of copies, can be set to the most frequently used modes. When you copy a document, the default settings are used unless they are changed by using the corresponding buttons on the control panel.

To create your own default settings:

1Press Menu on the control panel until “Copy Setup” appears on the top line of the display.

The first menu item, “Default-Change”, appears on the bottom line.

2Press Enter to access the menu item. The first setup

option, “Darkness”, appears on the bottom line.

3Press the scroll button ( or ) to scroll through the setup options.

4When the option you want to set appears, press Enter to access the option.

5Change the setting using the scroll button ( or ).

For the SCX-4521F, you can enter the value using the number keypad.

6Press Enter to save the selection.

7Repeat steps 3 through 6, as needed.

8To return to Standby mode, press Stop/Clear.

NOTE: While you are setting copy options, pressing Stop/Clear cancels the changed settings and restores their default status.

Setting the Time Out Option

You can set the time the machine waits before it restores the default copy settings, if you do not start copying after changing them on the control panel.

1Press Menu on the control panel until “Copy Setup” appears on the top line of the display.

2 Press the scroll button ( or ) to display “Timeout” on the bottom line.

3Press Enter to access the menu item.

4Press the scroll button ( or ) until the status you want appears on the display.

You can select from 15, 30, 60, and 180 (seconds). Selecting “Off” means that the machine does not restore the default settings until you press Start to begin copying, or Stop/Clear to cancel.

5Press Enter to make your selection.

6To return to Standby mode, press Stop/Clear.

4.6 Copying

Setting the Favorite Copy Option

You can set Favorite Copy on the control panel works as a special copy button. Assign one of the copy feature to Favorite Copy for quick accessing.

1Press Menu on the control panel until “Copy Setup” appears on the top line of the display.

2Press the scroll button ( or ) to display “Favorite Copy” on the bottom line.

3Press Enter to access the menu item.

4Press the scroll button ( or ) until the feature you want appears on the display.

You can select from Clone, Copy Collate, Auto fit, ID Card Copy, 2 Up, 4 Up, and Poster. See “Using Special Copy Features” on page 4.4 for details about each feature.

5Press Enter to make your selection.

To use the special copy feature quickly, press Favorite Copy then you will see the assigned special copy feature on the display. Press Enter to start copy job.