Samsung SCX-4521F Loading a Document, To fax a document using the Automatic Document Feeder ADF

Sending a Fax

Loading a Document

You can use the Automatic Document Feeder (ADF) or the document glass to load an original document for faxing. Using the ADF, you can load up to 30 sheets of 20 lb (75 g/m2 bond) paper at a time. You can, of course, place only one sheet at a time on the document glass. For details about preparing a document, see “Preparing a Document” on page 4.1.

To fax a document using the Automatic Document Feeder (ADF):

1Load the document face up into the ADF. You can insert up to 30 sheets at a time.

Make sure that the bottom of the document stack matches the paper size marked on the document tray.

To fax a document from the document glass:

1Lift and open the document cover.

2Place the document face down on the document glass and align it at the top left corner of the glass.

2Adjust the document guide on the ADF to match the width of the document.

NOTE: Dust on the ADF glass may cause black lines on the printout. Keep it always clean.

NOTE: Make sure that no other documents are in the ADF (Automatic Document Feeder). If a document is detected in the ADF, the machine gives it priority over the document on the document glass.

3Close the document cover.

7.3

Faxing (Only for SCX-4521F)