
2Selecting an Operating Mode
When you turn the register on and press the m key, the mode selection window will appear on the display, listing available operating modes as shown below.
Mode selection window
Operating Modes
You can select any mode other than REG from the list in the mode selection window. Your register supports the following operating modes:
| This mode allows you to enter various sales information. The mode selection | |
REG mode | window does not list this mode. To select this mode from the mode selection | |
| window, press the akey. | |
OPXZ mode | This mode allows clerks to take X or Z reports on their sales information. | |
|
| |
OFF mode | This mode locks all operations of the register. When you select this mode, the | |
window will disappear. Pressing any key turns the register ON. | ||
| ||
|
| |
VOID mode | This mode allows correction after finalizing a transaction. | |
|
| |
X1/Z1 mode | This mode is used to take various daily total reports (X1/Z1 reports). | |
|
| |
X2/Z2 mode | This mode is used to take various weekly or monthly reports (X2/Z2 reports). | |
|
| |
PROGRAM mode | This mode is used to program various items. | |
|
| |
SD CARD mode | This mode allows you to save and load the data of your register to and from an SD | |
card. | ||
| ||
|
|
11