Sharp ER-A347A instruction manual Device Configuration Programming, Keyboard

Device Configuration Programming

Use the following procedure to select a device configuration programming:

Procedure

1. In the SETTING window, select “11 DEVICE CONFIG.”

•The DEVICE CONFIG window will appear.

2.Select any option from the following options list:

	1	KEYBOARD	Keyboard
	2	DISPLAY	Display
	3	PRINTER	Printer
The screen continues.	4	EFT	EFT
	5	RS PORT	RS port (COM1, COM2)
	6	ONLINE	On-line
	7	SCANNER	Scanner
	(7	SRM	SRM (Sales Recording Module))

The following illustration shows those options included in this programming group.

11 DEVICE CONFIG				1	KEYBOARD	l See “Keyboard” this page.
			2		DISPLAY	l See “Display” on page 79.
			3		PRINTER	l See “Printer” on page 79.
			4		EFT	l See “EFT” on page 79.
			5		RS PORT	l See “RS port (COM1, COM2)” on page 80.
			6		ONLINE	l See “On-line” on page 80.
		7			SCANNER	l See “Scanner” on page 81.
	(7				SRM	l See “SRM (Sales Recording Module)” on page 81.)

NOTE • The EFT function is not appeared in the Quebec fiscal type.

•The SRM function is appeared in the Quebec fiscal type only.

•For enable/disable of the Quebec fiscal mode, please contact your authorized SHARP dealer.

■■ Keyboard

Procedure

Program each item as follows:

•BUFFERING (Use the selective entry) YES: Enables the buffering keyboard. NO: Disables the buffering keyboard.

•TOUCH SOUND (Use the selective entry) YES: Set to sound

NO: Not to sound

78