
EFT Test Function
The EFT Test function appears only when the RS port is programmed to “EFT” in “Device Configuration Programming”.
Use the following procedure to perform the EFT test function.
Procedure
1.
Press the jkey and select the “6 PROGRAM MODE” and press the A key. In the “PROGRAM MODE” window,
select “3 EFT TEST” and press the Akey, The EFT TEST window will appear.
2. Press the Akey to perform the test function.
NOTE When the EFT terminal (CREDIT CARD terminal) is not connected, the EFT test function causes an error.
96