Sharp ER-A347A instruction manual a Programming, Basic Instructions, Programming screen

aProgramming

This chapter explains how to program various items.

Before you start programming, press the m key and select the “6 PROGRAM MODE” or “7 SD CARD MODE” by using the Ikey and press the Akey.

Basic Instructions

This section illustrates the basic programming by using an example of programming for departments.

■■ Programming screen

Opening screen: When you select the “6 PROGRAM MODE”, your display will show a programming opening screen corresponding to the mode you selected.

Mode you are in

Programming menu: Use the cursor keys or numeric key to select an option, and press the Akey.

Numeric entry and status information area

Code selecting screen (Dept. PLU):

Selected menu/option

Code number and its description

(In case of PLU/UPC, two lines are used for one code, upper line - code, lower line - description.)

Use the cursor keys or numeric keys to select an option, and press the Akey.

Numeric entry and status information area

Programming screen:

Selected code

Setting items:

Use the cursor keys to select an item.

To select an option, follow the instruction shown below. Numeric entry: Use numeric keys

Character entry: Use character keys

Selective entry: Press Pkey to toggle options, or press the Qkey to show the option list. Use the cursor keys to move the cursor and press the Qor Akey to select it.

47