Sharp ER-A347A instruction manual Cleaning the Printer Printer Head/Sensor/Roller

Cleaning the Printer (Printer Head/Sensor/Roller)

When the printed text is getting dark or faint, paper dust may be stuck to the printer head, sensor and/or roller. Clean them as follows:

CAUTION: Never touch the printer head with a tool or anything hard as it may damage the head. The paper cutter is mounted on the printer cover. Be careful not to cut yourself.

Printer head

Sensor

Roller

1.Select the OFF mode.

2.Remove the printer cover.

3.Lift up the print roller arm.

4.Remove the paper roll referring to the “Removing a Paper Jam” section.

5.Clean the printer head with a cotton swab or soft rag moistened with ethyl alcohol or isopropyl alcohol. Clean the roller and the sensor in the same manner.

6.Reset the paper roll correctly by following the steps in “Installing Paper Rolls”.

Print roller arm

107