Hitachi CP-X950W, CP-x950E specifications Communication, Control command code

Page 24

Connection to the control signal terminal (continued)

3.Communication

(1)Connect the projector and computer using RS 232C cable.

(2)Turn on the computer and after computer is setting up, turn on the projector.

(3)Select the data speed (COM.SPEED) and the data format (COM.BITS) of the projector. (See page 18)

(4)Startcommunication.

ProjectorComputer

	1	1	CD		D-sub 9pin
	2	2	RD		D-sub 9pin
	2	2	RD
	3	3	TD	1	2	3	4	5
	4	4	DTR	1	2	3	4	5
	4	4	DTR
	5	5	GND		6 7		8	9
	SELO 6	6	DSR
	RTS 7	7	RTS
	8	8	DTS
	9	9	RI
	GND 10
	11
	12
	RDP 13
	TDP 14

15RS232C cable

4. Control command code

Control command table

		Projector→Computer					Computer→Projector

	Item	Reply code			Ask code			Set code		Default code

		1st	2nd	data	1st	2nd	1st	2nd	data	1st	2nd
		1st	2nd	data	1st	2nd	1st	2nd	data	1st	2nd

	MOUSE	11h	05h	+1	20h	05h	31h	05h	+1	40h	05h

	COMMUNICATE	11h	06h	+1	20h	06h	31h	06h	+1	40h	06h

	POWER	11h	11h	+1	20h	11h	31h	11h	+1	———

	ZOOM	11h	12h	+1	———		31h	12h	+1	———

	FOCUS	11h	13h	+1	———		31h	13h	+1	———

	MIRROR	11h	14h	+1	20h	14h	31h	14h	+1	40h	14h

	INPUT	11h	21h	+1	20h	21h	31h	21h	+1	40h	21h

	(VIDEO) SYSTEM	12h	22h	+2	20h	22h	32h	22h	+2	40h	22h

	VOLUME	11h	23h	+1	20h	23h	31h	23h	+1	40h	23h

	MUTE	11h	24h	+1	20h	24h	31h	24h	+1	40h	24h

	BRIGHT	13h	31h	+3	20h	31h	33h	31h	+3	40h	31h

	CONTRAST	13h	32h	+3	20h	32h	33h	32h	+3	40h	32h

	COLOR	13h	33h	+3	20h	33h	33h	33h	+3	40h	33h

	TINT	13h	34h	+3	20h	34h	33h	34h	+3	40h	34h

	SHARPNESS	13h	35h	+3	20h	35h	33h	35h	+3	40h	35h

	H.PHASE	13h	37h	+3	20h	37h	33h	37h	+3	40h	37h

	H.POSIT	14h	38h	+4	20h	38h	34h	38h	+4	40h	38h

	H.SIZE	14h	36h	+4	20h	36h	34h	36h	+4	40h	36h

	V.POSIT	14h	3Ah	+4	20h	3Ah	34h	3Ah	+4	40h	3Ah

	BLANK	11h	41h	+1	20h	41h	31h	41h	+1	40h	41h

	REVEAL	11h	42h	+1	20h	42h	31h	42h	+1	———

24

Image 24

Contents Features ContentsOutline Operating GuideFor the Customers in U.K Video signal cables Power cordBefore use Video inputsDo not look directly at the lens when the lamp is lit Do not install this unit in an unstableDo not use power supplies If any abnormality occursBe careful in handling the power cord Do not stare directly into the laser ApertureHandle the power cord carefully CleaningClean inside the unit at least once two years When you are not going to use for a long timeDo not place this unit where it gets hot VolumeCleaning the lens Cleaning the cabinetNames and functions of each part Main unitStandby / on Remote control transmitter Laser onDisk PAD ¡ Remove the battery Compartment cover Names and functions of each partInstallation Installation of liquid crystal projectorView from the top View from the side View from the front View from the sideTurn the Main Power switch of the projector on. I on Basic operations Plug & PlayPress the STANDBY/ON button, for 1 second Adjustments and functions Press the Menu buttons or the Menu on / OFF buttonSET UP BrightnessColor SizeInput ImageOPT. Option BlankReveal Language COM. BitsConnection to the video signal terminals Connection to the RGB signal terminalConnection to the RGB signal terminal Example of computer signal Connection to the RGB signal terminal Initial set signalsConnection to the control signal terminal Control signal terminalMouse emulation Connection to the control signal terminal Control command code CommunicationControl data table Procedure of getting the Projector status Example of system setup Cleaning the air filterConnecting various equipment Clean the air filter using a vacuum cleaner Re-install the air filterLamp Message tableWhen you think something wrong Indicator displayDimension diagram