Hitachi CPX385W user manual Ports and Cables, Function Projector Port Connection Cables

Ports and Cables

Refer to the table below to find out which projector port and cable to use for connecting a given device. Use this table for determining which cables to prepare.

Function	Projector Port	Connection Cables
RGB input	RGB IN 1	Accessory RGB cable or optional RGB
	RGB IN 2	cable with D-sub 15-pin shrink jack and
		inch thread screws
RGB output	RGB OUT
	AUDIO IN 1
Audio input	(interlocked with RGB IN 1)	Optional audio cable with stereo mini jack
(from the computer)	AUDIO IN 2
	(interlocked with RGB IN 2)
USB mouse control	USB	Optional USB cable
PS/2 mouse control		Accessory PS/2 mouse cable
ADB mouse control	CONTROL	Optional ADB mouse cable
Serial mouse control		Optional serial mouse cable
RS-232C communication		Optional RS-232C cable
S-video input	S-VIDEO IN	Optional S-video cable with mini DIN 4-pin
		jack
Video input	VIDEO IN	Accessory audio/video cable
	COMPONENT VIDEO Y
Component video input	COMPONENT VIDEO CB/PB	Optional component video cable
	COMPONENT VIDEO CR/PR
Audio input	AUDIO IN L	Accessory audio/video cable or optional
(from video equipment)	AUDIO IN R	audio cable with RCA jack
Audio output	AUDIO OUT	Optional audio cable with stereo mini jack

NOTE About Plug-and-Play Capability

•This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel) compatible. Please take advantage of this function by connecting the accessory RGB cable to the RGB IN 1 port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.

•Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e. display devices).

•Please use the standard drivers as this projector is a Plug-and-Play monitor.

•Plug-and-Play may not function properly with some type of computers. Use the RGB IN 2 port if Plug-and-Play does not function correctly.

9