Hitachi CPX385W user manual Turning on the Power

Page 15

TURNING ON THE POWER

Precautions

Connect all devices to be used to the projector prior to turning on the power.

8 ～ 12

WARNING When the power is ON, a strong light is emitted. Do not look into the lens.

STANDBY/ON BLANK

LASER

VIDEORGB

Control panel

1	Make sure that the power cord is firmly and
	correctly connected to the projector and outlet
	3

2	Turn on the projector's power
2	Set the power switch to [ ] (ON). The projector will go

to STANDBY mode and the POWER indicator will light to solid orange.

POWER-indikator

power switch

NOTE Turn the power on/off in right order.

•Power on the projector before the computer or video tape recorder.

•Power off the projector after the computer or video tape recorder.

3 Press the STANDBY/ON button (control panel or remote control)

•The projector begins warming up and the POWER indicator blinks green.

	STANDBY/ON
	• The POWER indicator stops blinking and
	lights to solid green once the projector's
	power is completely on.
4	Remove the lens cap
4	The picture is projected.

14

Image 15

Contents Brukerhåndbok Vol.1 Grunnleggende Manuale Distruzioni Vol.1 Informazioni di baseContents Projector Features Power cordTransmitter Devices you will be using to the projector Only use the power cord that came with the projectorHandle Hook Power Switch AC Inlet To the Power Cord Part NamesUSB Port Search button ButtonAngle Adjustment Setting UP the ProjectorIf 43 aspect ratio Adjusting the Screen Size and Projection DistanceConnecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Using the Remote Control Putting batteries into the remote control unitOperating the remote control Turning on the Power Selecting an Input Signal Turning OFF the Power Temporarily Muting the Sound Adjusting the VolumePress the Volume button Press Buttons to adjust VolumeAdjusting the Position Use Buttons to adjust PositionPress the Position button Press the Auto button Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Automatic Adjustment for Video InputOn the screen to aid you in correcting Correcting Keystone DistortionsPress the Keystone button As illustrated on the right, a dialog will appearFreezing the Screen Using the Magnify FeatureSignal Searching Selecting the Aspect RatioTemporarily Blanking the Screen Press Buttons to adjust the level Using the Menu FunctionsSelect a menu using Buttons Then press Or Enter button Select an item using Buttons, then press Or Enter buttonOperating the PC Screen Available Functions Remote Control OperationHigh Voltage High Temperature High Pressure LampDo not use the projector with the lamp cover removed Replacing the lamp LampCaring for the air filter AIR FilterReplacing the air filter Handle Other CareFixing the Handle Bedienungsanleitung Teil 2 Fortsetzung For Technical see the end of this manual Multifunctional Settings Main MenuMain Menu PICTURE2 Menu Picture 1 MenuPicture 2 Menu PICTURE1 MenuVideo Input MenuInput Menu AutoStart UP Screen MenuScreen Menu BlankAuto OFF VolumeOption Menu Option MenuRelated Messages Power Lamp Temp Regarding the Indicator LampsVol.2-6 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-3Unit mm SpecificationsDimension Diagram SpecificationWarranty and AFTER-SERVICE Page Italy