Hitachi CPX6 user manual MY Button, Service, FAN Speed

OPTION Menu

OPTION Menu (continued)

Item

Description

This item is to assign one of the following functions to MY BUTTON 1 and 2 on the remote control (5).

Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button.

•COMPUTER: Sets port to COMPUTER IN.

•MIU: Sets port to MIU.

•S-VIDEO: Sets port to S-VIDEO.

•VIDEO: Sets port to VIDEO.

•e-SHOT: Displays the e-SHOT menu (52).

•INFORMATION: Displays a dialog of INPUT/MIU INFORMATION (42, 53).

If a signal is found, the dialog is switched as below.

	INPUT INFORMATION  MIU INFORMATION  OFF
	If no signal is found, the dialog is switched as below.
	MIU INFORMATION ó OFF
MY BUTTON	• AUTO KEYSTONE EXECUTE:
	Performs automatic keystone distortion correction (32).

•MY MEMORY:

Loads one of adjustment data stored (26).

When the current adjustment	When no data is saved
is not saved to memory a	in memory, a dialog is
dialog is displayed.	displayed.

3WKV/'/14; 4GECNNUCXGFRCTCOGVGTU

If you want to keep the current adjustment, please press the ◄ button to quit. Otherwise the current adjusted condition will be lost by loading a data.

•PICTURE MODE: Changes the PICTURE MODE (22).

•FILTER RESET:

Displays the filter time reset confirmation dialogue (39).

•VOLUME+: Set the volume up.

•VOLUME-: Set the volume down.

Selecting this item displays the SERVICE menu.

Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button to execute the item.

FAN SPEED AUTO ADJUST  GHOST  FILTER MESSAGE  KEY LOCK

SERVICE	FACTORY RESET  I NFORMATION  REMOTE FREQ.
	FAN SPEED
	Using the ▲/▼ buttons switches the rotation speed of the	014/#.
		*+)*
	cooling fans. The HIGH is the mode for use at highlands etc.
	Note that the projector is noisier when the HIGH is selected.
	HIGH ó NORMAL

(continued on next page)

40