Hitachi CPX6 Using a USB storage, Using an SD card, Inserting an SD card, Removing the SD card

Page 10
1.
2.
3.

Setting up

Using a USB storage

In order to view images stored in a USB storage, such as a USB memory, insert the device into the USB STORAGE port.

Before removing the USB storage, be sure to perform the REMOVE procedure using the SERVICE menu under the MIU menu. (54)

Using an SD card

In order to view images in an SD Memory Card (SD card), insert the card into the SD card slot. If the wireless network function is required, load the internal clock battery (58) and insert the enclosed Wireless network card (SD card) in to the SD card slot.

Inserting an SD card

Make sure that the power code is not plugged into the projector.

Remove the SD card slot cover. It might be recommended to hook the edge of its side face up to remove it.

Slowly insert the SD card completely into the SD card slot. Make sure that the angled

corner of the SD card is placed into the right side of the SD card slot, while inserting.

SD card slot cover

SD card slot

SD card slot

Angled corner

SD card

SD CARD

SD CARD

4. Replace the SD card slot cover. It is recommended that the cover is slid sideways to the projector.

Using the slot cover lock for security

Using the enclosed slot cover lock can prevent the SD card slot cover from being opened.

1. Open the two plates of the slot cover lock to put the tips of two plates together, and then insert the tips to the lock hole of the SD card slot cover.

2. Put the body of the two plates together. Then, hook a padlock or combination lock to the hole of the slot cover lock.

Removing the SD card

When removing “wireless network card“, turn the projector off and unplug the power cord.

On the other hand, when removing the “SD Memory Card”, be sure to perform the REMOVE procedure using the SERVICE menu under the MIU menu. (54)

NOTE • When using the projector with a wired LAN, please remove the wireless network card. IMPORTANT NOTE • To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

When using wireless network card, please make sure to put the SD card slot cover onto projector top case to protect the card from electrostatic discharge influence.

10

Image 10
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Content Fastening the lens cover Contents of packageReplacing the filter cover for bottom-up use HOT Part namesProjector 13 HOTControl panel Remote controlBack Remote control 3 4 5On a horizontal surface Setting upArrangement Suspended from the ceilingSetting up Connecting your devices VCR/DVD playerConnecting your devices About Plug-and-Play capabilityUsing the slot cover lock for security Using a USB storageUsing an SD card Inserting an SD cardUsing the security slot Connecting power supplySecurity slot About the remote control signal Remote controlPutting batteries Changing the frequency of remote control signal Using as a simple PC mouse & keyboardTurning off the power Power on/offTurning on the power Lens coverOperating Adjusting the volumeTemporarily muting the sound  For no signal Searching an input signalSelecting an input signal  For a PC or MIU signal Normal  43  169  SmallAdjusting the zoom and focus Adjusting the projectors elevatorFocus ring  For a PC signal Using the automatic adjustment featureAdjusting the position  For an MIU signalKeystone Using the magnify featureCorrecting the keystone distortions Magnify ON/OFFFreeze Freezing the screenTemporarily blanking the screen BlankEasy Menu Using the menu functionAdvanced Menu Auto Picture ModeAspect KeystoneEasy Menu Picture Menu GammaPicture Menu Using the / buttons switches the color temperature modeSelecting a mode whose name includes Custom and then pressing the button orLOAD1, LOAD2, LOAD3, LOAD4 MY MemorySAVE1, SAVE2, SAVE3, SAVE4 Over Scan Image MenuPosition Image Menu PhaseAuto Adjust SizeVideo NR Input MenuProgressive Color SpaceVideo Format Input MenuFrame Lock Resolution Although not all resolutions are guaranteedSetup Menu Volume Setup MenuAudio Screen Menu BlankScreen Menu Start UPMyScreen Capturing error has occurred. Please try againMyScreen registration is finished Message No Input is DetectedSync is OUT of Range Source NameComputer in  MIU Option MenuAuto Search Auto onAuto OFF Option MenuLamp Time MY Button ServiceFAN Speed Ghost Filter MessageRemote Freq Factory ResetKEY Lock InformationChanging the Password Using Security FeaturesInputting the Password This projector is equipped with security functionsTurning on the MyScreen Password Function Using the MyScreen Password FunctionIf you have forgotten your Password Setting the PasswordDescription Security Using the PIN Lock FunctionTurning the Password off Registering the PIN CodeTurning Off the PIN Lock Function If you have forgotten your PIN CodeSetting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off PC-LESS Live ModeMIU Menu PresentationMIU Menu Date and Time TimeDifference ModeSpeed NetworkYktgnguu Remove ALL, Remove SD CARD, Remove USB Lamp MaintenanceCase of replacement by yourself Type number CPX2 DT00781 / CPX6 DT00821 Replacing the lampLamp warning LampType number MU03602 Cleaning the air filterAir filter Filter coverInternal clock battery Maintenance Internal temperature is rising TroubleshootingThere is no input signal Related messagesRegarding the indicator lamps Resetting all settings Shutting the projector downSignal source does not correctly work Electrical power cord is not pluggedSignal cables are not correctly connected Input changeover settings are mismatchedNot properly adjusted Color settings are not correctly adjustedColor Space setting is not suitable Play monitorSpecifications

CPX6 specifications

The Hitachi CPX6 is a portable projector designed to meet the dynamic needs of both business professionals and educational institutions. Known for its reliability, performance, and versatility, the CPX6 offers a range of features that make it an ideal tool for presentations, lectures, and collaborative work environments.

One of the standout features of the Hitachi CPX6 is its impressive brightness, with a maximum output of 3,500 lumens. This ensures that images and presentations remain sharp and vivid even in well-lit environments, allowing users to deliver impactful visuals regardless of the setting. The projector boasts a native resolution of WXGA (1280 x 800), which is compatible with a wide range of content formats, providing excellent clarity for both text and images.

In terms of connectivity, the CPX6 is equipped with multiple input options including HDMI, VGA, and USB ports, facilitating seamless integration with various devices such as laptops, tablets, and media players. This flexibility is crucial for users who often switch between multiple source devices. Furthermore, the projector supports MHL compatibility, allowing for direct connection to mobile devices for quick presentations and content sharing.

To enhance user experience, the Hitachi CPX6 incorporates a range of advanced technologies. The Intelligent Eco mode optimizes power consumption without sacrificing brightness, extending lamp life and reducing overall operational costs. An estimated lamp life of up to 5,000 hours in Eco mode means users can enjoy prolonged use without frequent replacements, enhancing the projector's value over time.

Portability is another key characteristic of the CPX6, weighing just around 3 kg and featuring a compact design. Its lightweight build makes it easy to transport between different locations, catering to professionals who are on the move. The projector also includes a built-in 10-watt speaker, which eliminates the need for external audio systems in smaller venues.

Moreover, Hitachi's focus on user-friendliness is evident in the CPX6's intuitive navigation and remote control. With features such as Quick Start and Direct Power Off, users can save valuable time during setup and teardown. Additional functionalities like the vertical keystone correction and a variety of preset modes also contribute to a straightforward user experience.

Overall, the Hitachi CPX6 combines powerful performance with essential portability and user-friendly features, making it a practical solution for presentations in various settings. Its advanced technologies and thoughtful design cater to the diverse requirements of professionals and educators, ensuring effective communication and engagement in any environment.