Hitachi CPX6 user manual Shutting the projector down, Resetting all settings

Page 62

Troubleshooting

Regarding the indicator lamps (continued)

POWER

LAMP

TEMP

Description

indicator

indicator

indicator

 

 

 

 

 

 

 

 

There is a possibility that the interior portion

 

 

 

has become heated.

Blinking

 

 

Please turn the power off, and allow the projector to cool down at least

 

 

20 minutes. After the projector has sufficiently cooled down, please make

In Red

 

 

Turned

Lighting

confirmation of the following items, and then turn the power on again.

or

off

In Red

• Is there blockage of the air passage aperture?

Lighting

 

 

• Is the air filter dirty?

In Red

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

 

 

 

If the same indication is displayed after the remedy, please set

 

 

 

FAN SPEED of the SERVICE item in the OPTION menu to HIGH.

 

 

 

It is time to clean the air filter.

Lighting

Simultaneous

Please immediately turn the power off, and clean or change

the air filter referring to the section “Air Filter”. After cleaning or

In Green

blinking in Red

changing the air filter, please be sure to reset the filter timer.

 

 

 

 

 

 

After the remedy, reset the power to ON.

 

 

 

There is a possibility that the interior portion

Lighting

Alternative

has become overcooled.

Please use the unit within the usage temperature

In Green

blinking in Red

parameters (5°C to 35°C).

 

 

 

 

 

 

After the treatment, reset the power to ON.

Blinking in

 

 

At least 1 “Power ON” schedule is saved to the

Green for

Turned

Turned

projector.

approx. 3

off

off

(Please refer to the User’s Manual-Network Functions:

seconds

 

 

Schedule Settings for more information.)

NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

Shutting the projector down

Only when the projector can not be turned off by usual procedure (14), please push the shutdown switch using a pin or similar, and disconnect the power plug from the power outlet. Before turning it on again, wait at least 10 minutes to make the projector cool down enough.

Resetting all settings

USB

COMPUTER IN

Shutdown switch

When it is hard to correct some wrong settings, the FACTORY RESET function of the SERVICE item in the OPTION menu (42) can reset all settings(except LANGUAGE, FILTER TIME, LAMP TIME, FILTER MESSAGE, MIU and etc.) to the factory default.

62

Image 62
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Content Replacing the filter cover for bottom-up use Contents of packageFastening the lens cover HOT Part namesProjector 13 HOTControl panel Remote controlBack Remote control 3 4 5On a horizontal surface Setting upArrangement Suspended from the ceilingSetting up Connecting your devices VCR/DVD playerConnecting your devices About Plug-and-Play capabilityUsing the slot cover lock for security Using a USB storageUsing an SD card Inserting an SD cardSecurity slot Connecting power supplyUsing the security slot Putting batteries Remote controlAbout the remote control signal Changing the frequency of remote control signal Using as a simple PC mouse & keyboardTurning off the power Power on/offTurning on the power Lens coverTemporarily muting the sound Adjusting the volumeOperating  For no signal Searching an input signalSelecting an input signal  For a PC or MIU signal Normal  43  169  SmallFocus ring Adjusting the projectors elevatorAdjusting the zoom and focus  For a PC signal Using the automatic adjustment featureAdjusting the position  For an MIU signalKeystone Using the magnify featureCorrecting the keystone distortions Magnify ON/OFFFreeze Freezing the screenTemporarily blanking the screen BlankAdvanced Menu Using the menu functionEasy Menu Auto Picture ModeAspect KeystoneEasy Menu Picture Menu GammaPicture Menu Using the / buttons switches the color temperature modeSelecting a mode whose name includes Custom and then pressing the button orSAVE1, SAVE2, SAVE3, SAVE4 MY MemoryLOAD1, LOAD2, LOAD3, LOAD4 Position Image MenuOver Scan Image Menu PhaseAuto Adjust SizeVideo NR Input MenuProgressive Color SpaceFrame Lock Input MenuVideo Format Resolution Although not all resolutions are guaranteedSetup Menu Audio Setup MenuVolume Screen Menu BlankScreen Menu Start UPMyScreen registration is finished Capturing error has occurred. Please try againMyScreen Message No Input is DetectedSync is OUT of Range Source NameComputer in  MIU Option MenuAuto Search Auto onLamp Time Option MenuAuto OFF FAN Speed ServiceMY Button Ghost Filter MessageRemote Freq Factory ResetKEY Lock InformationChanging the Password Using Security FeaturesInputting the Password This projector is equipped with security functionsTurning on the MyScreen Password Function Using the MyScreen Password FunctionIf you have forgotten your Password Setting the PasswordDescription Security Using the PIN Lock FunctionTurning the Password off Registering the PIN CodeTurning Off the PIN Lock Function If you have forgotten your PIN CodeTurning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password Setting the Transition Detector off PC-LESS Live ModeMIU Menu PresentationMIU Menu Date and Time TimeDifference ModeSpeed NetworkYktgnguu Remove ALL, Remove SD CARD, Remove USB Lamp MaintenanceCase of replacement by yourself Type number CPX2 DT00781 / CPX6 DT00821 Replacing the lampLamp warning LampType number MU03602 Cleaning the air filterAir filter Filter coverInternal clock battery Maintenance Internal temperature is rising TroubleshootingThere is no input signal Related messagesRegarding the indicator lamps Resetting all settings Shutting the projector downSignal source does not correctly work Electrical power cord is not pluggedSignal cables are not correctly connected Input changeover settings are mismatchedNot properly adjusted Color settings are not correctly adjustedColor Space setting is not suitable Play monitorSpecifications
Related manuals
Manual 65 pages 54.91 Kb

CPX6 specifications

The Hitachi CPX6 is a portable projector designed to meet the dynamic needs of both business professionals and educational institutions. Known for its reliability, performance, and versatility, the CPX6 offers a range of features that make it an ideal tool for presentations, lectures, and collaborative work environments.

One of the standout features of the Hitachi CPX6 is its impressive brightness, with a maximum output of 3,500 lumens. This ensures that images and presentations remain sharp and vivid even in well-lit environments, allowing users to deliver impactful visuals regardless of the setting. The projector boasts a native resolution of WXGA (1280 x 800), which is compatible with a wide range of content formats, providing excellent clarity for both text and images.

In terms of connectivity, the CPX6 is equipped with multiple input options including HDMI, VGA, and USB ports, facilitating seamless integration with various devices such as laptops, tablets, and media players. This flexibility is crucial for users who often switch between multiple source devices. Furthermore, the projector supports MHL compatibility, allowing for direct connection to mobile devices for quick presentations and content sharing.

To enhance user experience, the Hitachi CPX6 incorporates a range of advanced technologies. The Intelligent Eco mode optimizes power consumption without sacrificing brightness, extending lamp life and reducing overall operational costs. An estimated lamp life of up to 5,000 hours in Eco mode means users can enjoy prolonged use without frequent replacements, enhancing the projector's value over time.

Portability is another key characteristic of the CPX6, weighing just around 3 kg and featuring a compact design. Its lightweight build makes it easy to transport between different locations, catering to professionals who are on the move. The projector also includes a built-in 10-watt speaker, which eliminates the need for external audio systems in smaller venues.

Moreover, Hitachi's focus on user-friendliness is evident in the CPX6's intuitive navigation and remote control. With features such as Quick Start and Direct Power Off, users can save valuable time during setup and teardown. Additional functionalities like the vertical keystone correction and a variety of preset modes also contribute to a straightforward user experience.

Overall, the Hitachi CPX6 combines powerful performance with essential portability and user-friendly features, making it a practical solution for presentations in various settings. Its advanced technologies and thoughtful design cater to the diverse requirements of professionals and educators, ensuring effective communication and engagement in any environment.