Hitachi CP-X870 user manual Operating the PC Screen, Available Functions Remote Control Operation

Page 27

OPERATING THE PC SCREEN

You can use the remote control as a simplified mouse or keyboard.

CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment.

Only connect to a PC.

Before connecting, read the manuals of the device you will connect.

Do not unplug the connector cables while the computer is operating.

LASER

INDICATOR

STANDBY/ON VIDEO RGB

 

UP

FOCUS ZOOM

PAGE

 

DOWN

BLANK

LASER

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION AUTO PinP

MAGNIFY

VOLUME

ON

 

FREEZE

MUTE

OFF

 

WIRELESS KEYSTONE

ONE TOUCH

PS/2, ADB, Serial Mouse Control

1.Turn off the projector and PC power, and connect the projector’s CONTROL terminal to the computer via the mouse cable.

2.If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control function is given priority, and mouse control from the CONTROL terminal will not function.

3.Turn on the projector power, then the computer.

The functions in the table below can be controlled. If you have difficulty with control, restart the computer (either from the software or by pressing the restart button).

Available Functions

Remote Control Operation

Move Pointer

Move using

on the disk pad

Left click with mouse

Press the center

of the disk pad

Right click with mouse

Press the right mouse button

USB Mouse/Keyboard Control

1.Connect the projector’s USB terminal to a PC using a USB cable. The functions in the table below can be controlled.

Available Functions

 

Remote Control Operation

 

 

 

 

Move Pointer

 

Move using

on the disk pad

 

 

 

 

Left click with mouse

 

Press the center

of the disk pad

 

 

 

Right click with mouse

 

Press the right mouse button

 

 

 

 

Press the keyboard’s

keys

Press

 

 

 

 

Press the keyboard’s ENTER key

 

Press the ENTER button

 

 

 

Press keyboard’s PAGE UP key

 

Press PAGE UP button

 

 

 

Press keyboard’s PAGE DOWN key

 

Press PAGE DOWN button

 

 

 

Press keyboard’s ESC key

 

Press ESC button

 

 

 

 

NOTES

It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g. track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing devices. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer’s hardware manual for details.

The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.

The USB control can only be used for the functions listed above. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).

This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.

26

Image 27
Contents CP-X870W CP-X870Contents US Type UK Type Europe Type Projector With Lens Cap Projector FeaturesRGB cable Video/Audio cable Vol.1/Vol.2 Safety Instructions Soft carrying case Remote controlDevices you will be using to the projector Only use the power cord that came with the projectorProjector Part NamesRemote Control Turn the elevator screw to fine tune Setting UP the ProjectorAdjusting the Projectors Elevator Feet Press and hold in the elevator ButtonsAdjusting the Screen Size and Projection Distance ScreenTop view Side view Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesA a a BNC Input DVI InputConnecting to a DVD Player Connecting to a VCRConnecting to a Display Monitor Close the battery cover Using the Remote ControlPutting batteries into the remote control unit Remove the battery coverMeters with a 40-degree range Using the Remote ControlOperating the remote control Remote control in an area free from obstaclesTurning on the Power Selecting an Input Signal Turning on the PowerTurning OFF the Power Temporarily Muting the Sound Adjusting the VolumePress the Volume button Use the lever switch / to adjust the volumeAdjusting the Position Use the , , , buttons to adjust the positionPress the Position button Press the Auto button Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Automatic Adjustment for Video InputOn the screen to aid you in correcting the distortion Correcting Keystone DistortionsPress the Keystone button As illustrated on the right, a dialog will appearFreezing the Screen Using the Magnify FeatureYou can activate the following functions just by Adjusting Screen with ONE-TOUCHWas begun When BNC RGB is selected Press the ONE Touch buttonPress the Blank button Selecting the Aspect RatioTemporarily Blanking the Screen Press the Aspect buttonUsing the Menu Functions Use the lever switch To adjust the levelPress the Menu button Operating the PC Screen Available Functions Remote Control OperationHigh Voltage High Temperature High Pressure LampDo not use the projector with the lamp cover removed Replacing the lamp LampCaring for the air filter AIR FilterReplacing the air filter AIR FilterCaring for the lens Caring for the cabinet and remote control transmitterOther Care Caring for the inside of the projectorFor Technical see the end of this manual Item selection Multifunctional SettingsMain Menu Main MenuPICTURE-2 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-1 MenuMultifunctional Settings Input MenuInput Menu Auto Menu Auto MenuStart UP Screen MenuScreen Menu BlankIR Remote Wireless MenuOption Menu Option MenuCheck the AIR Flow Related MessagesNo Input is Detected Sync is OUT of RangePower Lamp Temp Regarding the Indicator LampsPhenomenon Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-3Unit mm SpecificationsDimension Diagram SpecificationWarranty and AFTER-SERVICE Signal Connector PIN Assignment Signal Terminal SpecificationSub 15-pin Shrink Resolution FH kHz FV Hz Rating Signal mode Display Example of Computer SignalInitial SET Signals PS/2 Mouse Connection to the Mouse ControlADB Mouse USB MouseProtocol Command dataConsist of header 7 bytes + command data 6 bytes RS-232C CommunicationRS-232C Communication 日本語 Command data chartBe EF BA D2 Be EF AD D0 Be EF CB D0 Hitachi France Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi Business Systems Nordic