Hitachi CP-X870 user manual Multifunctional Settings, Main Menu, Item selection

Page 34

MULTIFUNCTIONAL SETTINGS

This device has 8 separate menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, SCREEN, OPTION, WIRELESS. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.

Menu screen display : Press the "MENU" button.

Menu selection : Use the lever switch / to select a menu name, then press the or ENTER button.

Item selection	: Use the lever switch / to select an item, then press the	or
	ENTER button.

Return menu to last previous screen: Press the button or the ESC button.

Execution of settings and/or adjustments: Perform the operation using the lever switch / .

(For further details, read the explanation for each separate menu.)

Initialization of settings and/or adjustments: During operation, press the RESET button. (Functions that are executed at the same time as a selection, including H PHASE, LANGUAGE selection, and ADJUST, will not be reset.)

End menu operations: Press the MENU button, or do not perform any operation for several seconds.

MAIN Menu

With the MAIN menu, the seven items shown in the Table below can be performed.

Perform each operation in accordance with the instructions in the Table.

MENU

MAIN	BRIGHT
PICTURE-1	CONTRAST
PICTURE-2	ASPECT
INPUT	PICT. POSIT.
AUTO	GAMMA
SCREEN	MIRROR
OPTION	LANGUAGE
WIRELESS	12
: SELECT

	MAIN Menu								Example : MAIN Menu
	MAIN Menu								(BRIGHT)
	Item							Description
	BRIGHT	Adjust Brightness: Light					⇔	Dark
	CONTRAST	Adjust Contrast: Strong					⇔	Weak
		Select Aspect Ratio:
		At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEO
		Input:
	ASPECT	4:3	⇔	16:9
		At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:
		4:3	⇔	16:9	⇔	SMALL
		• The SMALL picture may not be displayed correctly with certain input signals.
	PICT.POSIT.	Select Picture Position (for 16:9/SMALL Picture):
	PICT.POSIT.	TOP ⇔ CENTER ⇔ BOTTOM
		TOP ⇔ CENTER ⇔ BOTTOM
	GAMMA	Select Gamma Mode:
	GAMMA	NORMAL		⇔	CINEMA		⇔	DYNAMIC
		NORMAL		⇔	CINEMA		⇔	DYNAMIC
	MIRROR	Select Mirror Status:
	MIRROR	NORMAL		⇔	H:INVERT		⇔	V:INVERT ⇔	H&V:INVERT
		NORMAL		⇔	H:INVERT		⇔	V:INVERT ⇔	H&V:INVERT
		Select Menu Language:
	LANGUAGE	ENGLISH		⇔	FRANÇAIS			⇔ DEUTSCH	⇔ ESPAÑOL ⇔
	LANGUAGE	ITALIANO		⇔ NORSK ⇔ NEDERLANDS ⇔ 日本語 ⇔
		ITALIANO		⇔ NORSK ⇔ NEDERLANDS ⇔ 日本語 ⇔
		POTUGUÊS ⇔			中文	⇔

2

Image 34

Contents CP-X870 CP-X870WContents Soft carrying case Remote control Projector FeaturesRGB cable Video/Audio cable Vol.1/Vol.2 Safety Instructions US Type UK Type Europe Type Projector With Lens CapOnly use the power cord that came with the projector Devices you will be using to the projectorPart Names ProjectorRemote Control Press and hold in the elevator Buttons Setting UP the ProjectorAdjusting the Projectors Elevator Feet Turn the elevator screw to fine tuneScreen Adjusting the Screen Size and Projection DistanceTop view Side view Connecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerBNC Input DVI Input A a aConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Remove the battery cover Using the Remote ControlPutting batteries into the remote control unit Close the battery coverRemote control in an area free from obstacles Using the Remote ControlOperating the remote control Meters with a 40-degree rangeTurning on the Power Turning on the Power Selecting an Input SignalTurning OFF the Power Use the lever switch / to adjust the volume Adjusting the VolumePress the Volume button Temporarily Muting the SoundUse the , , , buttons to adjust the position Adjusting the PositionPress the Position button Automatic Adjustment for Video Input Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Press the Auto buttonAs illustrated on the right, a dialog will appear Correcting Keystone DistortionsPress the Keystone button On the screen to aid you in correcting the distortionUsing the Magnify Feature Freezing the ScreenPress the ONE Touch button Adjusting Screen with ONE-TOUCHWas begun When BNC RGB is selected You can activate the following functions just byPress the Aspect button Selecting the Aspect RatioTemporarily Blanking the Screen Press the Blank buttonUse the lever switch To adjust the level Using the Menu FunctionsPress the Menu button Available Functions Remote Control Operation Operating the PC ScreenLamp High Voltage High Temperature High PressureDo not use the projector with the lamp cover removed Lamp Replacing the lampAIR Filter Caring for the air filterAIR Filter Replacing the air filterCaring for the inside of the projector Caring for the cabinet and remote control transmitterOther Care Caring for the lensFor Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu Item selectionPICTURE-1 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuBlank Screen MenuScreen Menu Start UPOption Menu Wireless MenuOption Menu IR RemoteSync is OUT of Range Related MessagesNo Input is Detected Check the AIR FlowRegarding the Indicator Lamps Power Lamp TempVol.2-3 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 PhenomenonSpecification SpecificationsDimension Diagram Unit mmWarranty and AFTER-SERVICE Signal Terminal Specification Signal Connector PIN AssignmentSub 15-pin Shrink Example of Computer Signal Resolution FH kHz FV Hz Rating Signal mode DisplayInitial SET Signals USB Mouse Connection to the Mouse ControlADB Mouse PS/2 MouseRS-232C Communication Command dataConsist of header 7 bytes + command data 6 bytes ProtocolRS-232C Communication Command data chart 日本語Be EF BA D2 Be EF AD D0 Be EF CB D0 Hitachi Business Systems Nordic Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi France