Hitachi CP-X880 user manual Multifunctional Settings, Input Menu

Page 5

MULTIFUNCTIONAL SETTINGS (continued)

INPUT Menu

 

MENU

 

 

 

MAIN

BNC

RGB

 

PICTURE-1

VIDEO

COMPONENT

 

 

PICTURE-2

HDTV

 

The three Input menu items listed in the table below can be manipulated. For

INPUT

SYNC ON G

 

AUTO

P. IN P. INPUT

 

RGB input, the reception signal’s horizontal and vertical frequency is displayed

SCREEN

P. IN P. POSIT

 

OPTION

 

 

on the initial menu screen. Use the table below as a guide for operation.

WIRELESS

 

 

: SELECT

 

 

 

 

Example : INPUT Menu

INPUT Menu

 

 

(BNC)

 

 

 

 

 

Item

Description

 

 

 

BNC Pin (R/CR/PR, G/Y, B/CB/PB, H, V) function selection:

BNC (RGB) BNC (COMPONENT)

 

(R) (G) (B) (H) (V)

 

(CR/PR) (Y) (CB/PB) ( - ) ( - )

 

 

BNC

(Pins for RGB)

(Pins for COMPONENT)

 

Selecting BNC (RGB) allows the 5 RGB2 pins (R/CR/PR, G/Y, B/CB/PB, H, V) to be

 

 

used as RGB signal BNC input as-is.

 

 

 

 

Selecting BNC (COMPONENT) allows the 3 leftmost RGB2 pins (R/CR/PR, G/Y,

 

B/CB/PB) to be used as the COMPONENT VIDEO input CR/PR, Y, and CB/PB pins.

 

 

 

 

 

 

 

Select Mode of Signal Type (for VIDEO/S-VIDEO):

 

 

AUTO

NTSC

PAL

SECAM

NTSC4.43

 

M-PAL

N-PAL

 

 

 

 

 

When AUTO is selected, the video/ S-video input function under ADJUST (

5 are enabled, and is

VIDEO

executed simultaneously so that the optimum signal mode is selected from among the modes listed above.

Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g. The image becomes irregular, or lacks color.)

•AUTO mode may not function correctly with a PAL60 signal and certain other signals.

•The AUTO mode operation requires approximately 10 seconds.

•For COMPONENT VIDEO, the signal type is identified automatically even if this function is inactive. For a HDTV signal, refer to the item HDTV below.

HDTV

Select HDTV Signal Mode: 1080i

1035i

• If the selected HDTV mode is incompatible with the input signal, the picture may be distorted.

 

 

 

 

 

On/Off SYNC ON G Mode: TURN ON

TURN OFF

 

Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode

SYNC ON G

allows reception of SYNC on G.

 

 

 

•In the SYNC ON G mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal.

P. IN P. INPUT

P. IN P. screen (*) input signal selection: VIDEO

S-VIDEO

Selects the signal displayed on the P. IN P. subscreen.

 

 

 

P. IN P. screen (*) display position selection:

P. IN P. POSIT

Selects the position at which the P. IN P. subscreen is displayed.

(*)The P. IN P. (picture-in-picture) function displays the video signal image in a subscreen (P. IN P. screen) on top of the screen on which the RGB signal image is being displayed. (See “Displaying Child Window” Vol.1

24 .)

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Brukerhåndbok Vol.1 Grunnleggende CP-X880W/CP-X885WManuale Distruzioni Vol.1 Informazioni di base Contents Main Menu Multifunctional SettingsMain Menu Item selectionPICTURE-2 Menu PICTURE-1 MenuPICTURE-1 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuOption Menu Wireless MenuOption Menu Related Messages Power Lamp Temp Regarding the Indicator LampsVol.2-2 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-3 Vol.2-7Dimension Diagram SpecificationsSpecification Unit mmWarranty and AFTER-SERVICE Signal Terminal Specification Signal Connector PIN AssignmentRGB in 1/2 Sub 15-pin ShrinkResolution FH kHz FV Hz Rating Signal mode Display mode Example of Computer SignalInitial SET Signals ADB Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseConsist of header 7 bytes + command data 6 bytes Command dataRS-232C Communication ProtocolRS-232C Communication C4 D3 Command data chartBe EF BA D2 Be EF AD D0 Be EF CB D0 Hitachi Sales Europe GmbH Hitachi Europe GmbHHitachi Business Systems Nordic Hitachi FranceIN. P Picture in Picture Power cord Projector FeaturesSoft carrying case Remote control US Type UK Type Europe Type Projector With Lens CapDevices you will be using to the projector Only use the power cord that came with the projectorPart Names Remote Control Adjusting the Projectors Elevator Feet Setting UP the ProjectorPress and hold in the elevator Buttons Turn the elevator screw to fine tuneTop view Side view Adjusting the Screen Size and Projection DistanceScreen Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesA a a BNC Input DVI InputConnecting to a Display Monitor Connecting to a DVD PlayerConnecting to a VCR Putting batteries into the remote control unit Using the Remote ControlRemove the battery cover Close the battery coverOperating the remote control Using the Remote ControlRemote control in an area free from obstacles Meters with a 40-degree rangeTurning on the Power Selecting an Input Signal Turning on the PowerTurning OFF the Power Press the Volume button Adjusting the VolumeUse the lever switch / to adjust the volume Temporarily Muting the SoundPress the Position button Adjusting the PositionUse the , , , buttons to adjust the position Automatic Adjustment for RGB Input Using the Automatic Adjustment FeatureAutomatic Adjustment for Video Input Press the Auto buttonPress the Keystone button Correcting Keystone DistortionsAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionFreezing the Screen Using the Magnify FeatureWas begun When BNC RGB is selected Adjusting Screen with ONE-TOUCHPress the ONE Touch button You can activate the following functions just byTemporarily Blanking the Screen Selecting the Aspect RatioPress the Aspect button Press the Blank buttonPress the Menu button Using the Menu FunctionsUse the lever switch To adjust the level Operating the PC Screen Available Functions Remote Control OperationDo not use the projector with the lamp cover removed High Voltage High Temperature High PressureLamp Replacing the lamp LampCaring for the air filter AIR FilterReplacing the air filter AIR FilterOther Care Caring for the cabinet and remote control transmitterCaring for the inside of the projector Caring for the lens

CP-X880 specifications

The Hitachi CP-X880 is a highly regarded projector known for its impressive performance and versatility, catering to both educational and corporate environments. Designed with a focus on delivering high-quality images and ease of use, the CP-X880 stands as a reliable choice for presentations, lectures, and training sessions.

One of the main features of the CP-X880 is its native XGA resolution (1024 x 768), which ensures sharp and vivid images, making it ideal for detailed presentations. With a brightness of 3,500 ANSI lumens, this projector can effectively project images in well-lit rooms, reducing concerns about ambient light interfering with visibility. Its high contrast ratio of 2000:1 enhances image depth and ensures that text remains crisp and readable.

The CP-X880 employs advanced technologies such as DLP (Digital Light Processing), which ensures smooth video playback and minimal motion blur, making it suitable for dynamic content. The use of Color Management technology further enhances the projector's color accuracy, allowing for vibrant and true-to-life color reproduction. This characteristic is particularly beneficial for presentations that require displaying graphics or images with precise color fidelity.

Portability is another significant attribute of the Hitachi CP-X880. Weighing around 5.5 kg, it is relatively lightweight compared to other projectors in its category, facilitating easy transport between locations. Additionally, it features comprehensive connectivity options, including HDMI, RGB, and composite inputs. This flexibility allows users to connect various devices, such as laptops, DVD players, and document cameras, without hassle.

The CP-X880 also includes a built-in 10-watt speaker, which provides adequate sound amplification for small to medium-sized rooms. This feature eliminates the need for external speakers in many situations, streamlining setup and reducing equipment clutter.

User-friendly operations are emphasized in the design of the CP-X880, equipped with an intuitive menu system and remote control functionality that simplifies navigation. It also has features such as automatic keystone correction and a quick start-up time, enhancing efficiency during presentations.

In summary, the Hitachi CP-X880 is a robust projector that combines high brightness, excellent resolution, and versatile connectivity options. Its reliability and user-friendly design make it a valuable asset for educators and business professionals seeking impactful visual communication solutions.
Top Page Image Contents