Hitachi CP-X880 user manual Lamp, Replacing the lamp

Page 52

THE LAMP (continued)

Replacing the lamp

All projector lamps will wear out eventually. If used for long periods of time, the image could become darkened, and the color contrast could be impacted as well. We recommend that you replace your lamps early. If the LAMP indicator turns red, or a message prompts you to replace the lamp when you power up the projector, the lamp needs to be replaced. (See "Related Messages" (Vol.2 8 ) and "Regarding the Indicator Lamps" (Vol.2 9 ) for details.)

1

Turn off the projector, and unplug the

power cord. Allow the lamp bulb to cool

 

for at least 45 minutes, and prepare a

 

new lamp (serial number: DT00531)

 

 

 

 

2

After making sure that the projector has

cooled adequately, slide the knob of a

lamp cover lock as shown in the figure. Then, one side of the lamp cover is raised. Pull up the lamp cover and remove it, as shown in the figure

Knob of Lamp

Cover Lock

4

Insert the new lamp, and

tighten the 3 screws firmly to

 

lock it in place

 

 

 

 

5

Interlocking the 2 tabs of the

lamp cover to the projector,

put the lamp cover on the projector.

Then push the point of the lamp cover to fix it, as shown in the figure.

Make sure that the lamp cover does’t come up

Tabs

3

Unscrew the 3 screws, and slowly pull

out the lamp by the handle

Be careful not to touch the inside of the lamp case.

 

Push

6

Turn on the projector power,

and reset the lamp timer

• To reset the lamp timer, from the OPTION menu, select the LAMP TIME. (Vol.2 7 )

ATTENTION • Make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.

Do not use with lamp cover removed.

Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.

When the lamp has been replaced after the message of “CHANGE THE LAMP .....THE POWER WILL TURN OFF AFTER 0 hr.” is displayed, or the LAMP indicator is red, complete the following operation within 10 minutes of switching power on.

NOTEThe LAMP indicator is also red when the lamp unit reaches high temperature. Before replacing the lamp, switch power off, wait approximately 20 minutes, and switch power on again. If the LAMP indicator is still red, replace the lamp.

28

Image 52
Contents Manuale Distruzioni Vol.1 Informazioni di base CP-X880W/CP-X885WBrukerhåndbok Vol.1 Grunnleggende Contents Multifunctional Settings Main MenuMain Menu Item selectionPICTURE-1 Menu PICTURE-2 MenuPICTURE-1 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuOption Menu Wireless MenuOption Menu Related Messages Regarding the Indicator Lamps Power Lamp TempPhenomena That May Easily Be Mistaken for Machine Defects Vol.2-2Vol.2-3 Vol.2-7Specifications Dimension DiagramSpecification Unit mmWarranty and AFTER-SERVICE Signal Connector PIN Assignment Signal Terminal SpecificationRGB in 1/2 Sub 15-pin ShrinkExample of Computer Signal Resolution FH kHz FV Hz Rating Signal mode Display modeInitial SET Signals Connection to the Mouse Control ADB MouseUSB Mouse PS/2 MouseCommand data Consist of header 7 bytes + command data 6 bytesRS-232C Communication ProtocolRS-232C Communication Command data chart C4 D3Be EF BA D2 Be EF AD D0 Be EF CB D0 Hitachi Europe GmbH Hitachi Sales Europe GmbHHitachi Business Systems Nordic Hitachi FranceIN. P Picture in Picture Projector Features Power cordSoft carrying case Remote control US Type UK Type Europe Type Projector With Lens CapOnly use the power cord that came with the projector Devices you will be using to the projectorPart Names Remote Control Setting UP the Projector Adjusting the Projectors Elevator FeetPress and hold in the elevator Buttons Turn the elevator screw to fine tuneScreen Adjusting the Screen Size and Projection DistanceTop view Side view Connecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerBNC Input DVI Input A a aConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Using the Remote Control Putting batteries into the remote control unitRemove the battery cover Close the battery coverUsing the Remote Control Operating the remote controlRemote control in an area free from obstacles Meters with a 40-degree rangeTurning on the Power Turning on the Power Selecting an Input SignalTurning OFF the Power Adjusting the Volume Press the Volume buttonUse the lever switch / to adjust the volume Temporarily Muting the SoundUse the , , , buttons to adjust the position Adjusting the PositionPress the Position button Using the Automatic Adjustment Feature Automatic Adjustment for RGB InputAutomatic Adjustment for Video Input Press the Auto buttonCorrecting Keystone Distortions Press the Keystone buttonAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionUsing the Magnify Feature Freezing the ScreenAdjusting Screen with ONE-TOUCH Was begun When BNC RGB is selectedPress the ONE Touch button You can activate the following functions just bySelecting the Aspect Ratio Temporarily Blanking the ScreenPress the Aspect button Press the Blank buttonUse the lever switch To adjust the level Using the Menu FunctionsPress the Menu button Available Functions Remote Control Operation Operating the PC ScreenLamp High Voltage High Temperature High PressureDo not use the projector with the lamp cover removed Lamp Replacing the lampAIR Filter Caring for the air filterAIR Filter Replacing the air filterCaring for the cabinet and remote control transmitter Other CareCaring for the inside of the projector Caring for the lens

CP-X880 specifications

The Hitachi CP-X880 is a highly regarded projector known for its impressive performance and versatility, catering to both educational and corporate environments. Designed with a focus on delivering high-quality images and ease of use, the CP-X880 stands as a reliable choice for presentations, lectures, and training sessions.

One of the main features of the CP-X880 is its native XGA resolution (1024 x 768), which ensures sharp and vivid images, making it ideal for detailed presentations. With a brightness of 3,500 ANSI lumens, this projector can effectively project images in well-lit rooms, reducing concerns about ambient light interfering with visibility. Its high contrast ratio of 2000:1 enhances image depth and ensures that text remains crisp and readable.

The CP-X880 employs advanced technologies such as DLP (Digital Light Processing), which ensures smooth video playback and minimal motion blur, making it suitable for dynamic content. The use of Color Management technology further enhances the projector's color accuracy, allowing for vibrant and true-to-life color reproduction. This characteristic is particularly beneficial for presentations that require displaying graphics or images with precise color fidelity.

Portability is another significant attribute of the Hitachi CP-X880. Weighing around 5.5 kg, it is relatively lightweight compared to other projectors in its category, facilitating easy transport between locations. Additionally, it features comprehensive connectivity options, including HDMI, RGB, and composite inputs. This flexibility allows users to connect various devices, such as laptops, DVD players, and document cameras, without hassle.

The CP-X880 also includes a built-in 10-watt speaker, which provides adequate sound amplification for small to medium-sized rooms. This feature eliminates the need for external speakers in many situations, streamlining setup and reducing equipment clutter.

User-friendly operations are emphasized in the design of the CP-X880, equipped with an intuitive menu system and remote control functionality that simplifies navigation. It also has features such as automatic keystone correction and a quick start-up time, enhancing efficiency during presentations.

In summary, the Hitachi CP-X880 is a robust projector that combines high brightness, excellent resolution, and versatile connectivity options. Its reliability and user-friendly design make it a valuable asset for educators and business professionals seeking impactful visual communication solutions.