Hitachi CP-X430 user manual Air Filter, Other Maintenance

Page 20

01CP-S420/CP-X430 03.9.2 0:08 PM ページ 19

MAINTENANCE (continued)

Air Filter

Cleaning the air Filter

The air filter should be cleaned as described below at intervals of approximately 100 hours.

1.Switch the projector power supply OFF, and remove the power cord from the power outlet.

2.Clean the air filter with a vacuum cleaner.

Replacing the Air Filter

Replace the air filter if contamination cannot be removed, or if it is damaged.

1.Remove the filter cover.

2.Remove the old filter.

3.Set the new filter and the filter cover.

CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “SAFETY

INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly.

Replace the air filter if contamination cannot be removed, or if it is damaged. Contact your dealer in such case. For the optional air filter, see the item “Optional Parts” of the Table 12.

Do not use the equipment with the air filter removed.

When the air filter is clogged with dust etc. the power supply is switched OFF automatically to prevent the temperature rising inside the projector.

ENGLISH

Other Maintenance

Maintenance Inside the Equipment

For safety reasons, ensure that the equipment is cleaned and checked by the dealer once every two years. Maintaining the equipment by yourself is dangerous.

Cleaning the Lens

Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.

Cleaning the Cabinet and Remote control transmitter

Gently wipe with a soft cloth. If dirt and stains etc. are not easily removed, use a soft cloth dampened with water, or water and a neutral detergent, and wipe dry with a soft, dry cloth.

CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “SAFETY

INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly.

Do not use detergents or chemicals other than those noted above (e.g. benzene or thinners).

Do not use cleaning sprays.

Do not rub with hard materials, or tap the equipment.

NOTE When this projector is brought into a warm room from a cold outdoor, condensation can take place on the projection lens and mirror inside, blurring the screen and reducing your eyesight, but do not worry. The condensation will disappear and the screen will return to a normal condition no sooner than the projector acclimates to the surrounding temperature.

ENGLISH-19

Image 20
Contents CP-S420/CP-X430 CP-S420WA/CP-X430WA/CP-X430WContents Before USE FeaturesContents of Package Component Video Before USEPart Names Transmitter Refer to P.9 OperationsLoading the Batteries Installation Installation of the Projector and ScreenAngle Adjustment Installation ReferenceCabling InstallationCabling Plug & Play Power ConnectionExample of System Setup Power on Power OFFOperations StandbyBasic Operation Description OperationsBasic Operation Menu Display Start/Stop Press the Menu button Select Mode of P.IN P. Display Press the PinP buttonNormal menu Single menu Setup Menu Setup MenuAutomatic Adjustment at RGB Input Select the Execute with Automatic Adjustment at Video Input Select the Execute withInput Menu Input MenuImage Menu Image Menu DescriptionStart UP MirrorSelect Menu Background Color Select with the / button Options MenuOptions Menu Reduce Increase No Signal MenuNo Signal Menu Description Lamp Life MaintenanceLamp Replacing the Lamp MaintenanceResetting the Lamp Timer Other Maintenance Air FilterTroubleshooting Message ContentsOSD Message OSD MessageTroubleshooting Indicators MessageIndicators Message IndicatorSymptom Possible cause Remedy SymptomSymptom Specifications SpecificationsWarranty and AFTER-SERVICE Technical Dimension DiagramSignal Connector Pin Assignment Example of computer signal TechnicalInitial set signals Connection to the Mouse Control PS/2, ADB or Serial MouseUSB Mouse PS/2 MouseADB Mouse Serial MouseCommunications setting Command dataRS-232C communication ProtocolRequesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Be EF CB D0 For the Customers in Canada Pour les utilisateurs au Canada Regulatory NoticesFCC Statement Warning Hitachi Europe, Digital Media Group Hitachi Europe S.r.1, Digital Media GroupHitachi Europe GmbH, Digital Media Group Hitachi Europe AB

CP-X430 specifications

The Hitachi CP-X430 is a versatile and high-performance portable projector designed to meet the needs of various environments, from classrooms to conference rooms. Renowned for its reliability and user-friendly features, this projector stands out in the market.

One of the main features of the CP-X430 is its powerful brightness, boasting an impressive 3,200 lumens. This high brightness level ensures that images are vivid and clear, even in well-lit rooms. The projector utilizes a 3LCD technology, which enhances color accuracy and produces life-like colors, making it ideal for presentations, educational purposes, and multimedia applications.

The CP-X430 has a native XGA resolution of 1024 x 768 pixels, providing sharp and detailed images. This resolution is particularly suitable for displaying text-heavy presentations and graphics, ensuring that viewers can easily read and interpret the content projected on the screen. Additionally, the unit supports various resolutions, including SVGA and WXGA, offering flexibility for different input sources.

In terms of connectivity, the CP-X430 includes multiple inputs, such as HDMI, VGA, and composite video, allowing users to connect a wide range of devices, from laptops to DVD players. This versatility makes it easy to integrate the projector into various setups, whether for corporate presentations or educational lectures.

Another characteristic worth noting is its lightweight and compact design, weighing just around 2.6 kg. This portability makes it easy to transport the projector from one location to another, making it a suitable choice for professionals who are frequently on the move.

The projector also features a long lamp life of up to 5,000 hours in Eco mode, minimizing maintenance requirements and reducing total cost of ownership. This extended lifespan helps ensure that the projector remains operational for extended periods, providing reliable performance for users.

Furthermore, the CP-X430 is designed with a range of user-friendly features, including a convenient remote control, intuitive on-screen menus, and quick setup options. These elements streamline the user experience, allowing for effortless operation, even for those who may not be tech-savvy.

In summary, the Hitachi CP-X430 is a robust and efficient projector that excels in various settings. With its high brightness, versatile connectivity, portability, and user-friendly design, it is poised to meet the demands of today's fast-paced work and learning environments, ensuring that presentations are impactful and memorable.